sewer hose mount

[swanny]

ok i have to ask. i would like to mount my sewer hose storage pipe (it's square) on my frame.
it fits perfect along the frame. now how to mount. very easy way for my application is to drill two small holes in the frame. and i stress small. the holes can be either in the large middle section or in the flange part. if this is a BIG no way, please tell me and give options

thanks for your help, kevin

[HughM]

Funny you should ask. I just finished my sewer hose storage pipe 2 weeks ago. Instead of drilling the frame I opted for welding 2 8 inch pieces of angle iron to the frame. Drilled holes in the angle iron and used 1/4 inch threaded stock bent around pipe and into the angle iron. Only difference is I used PVC pipe. It works great. I have a 10 ft. sewer hose section I put on the street side and a 20 ft section on curb side. This gives me the option of 10 ft, 20 ft. or 30 ft of sewer hose. Thread screw caps lets me in either side.
Hugh

[Trailer Trash 2]

I used the big TEK screws like the ones that hold up the spare tire bracket, right through the frame 5 minits

[bsmeaton]

Drilling the frame for that should be fine. Look at the great big holes Lippert cut through for the slides.

[swanny]

well i came up with an idea. it worked pretty good. no holes in the frame! but like bsmeaton said, from the size of the hole for the slide small holes mean nothing.
pics are on my shutterfly link in my signature. thank you for your help.