|
Changing Pin Box
This question is for some of you wrench turners, like myself, who do all your own maintenance & repairs and have changed out your pin box.
My HC has the standard pin box. Thinking of changing to the MorRyde Rubber Pin Box. Here's the situation: my standard pin box can't be RAISED. My B&W hitch can't be LOWERED. Pin box is as high as it can go, and hitch is as low as it can go. No more holes left in either case.
I'm currently level when towing. If you've ever replaced your standard pin box with the MorRyde Rubber Pin Box, is the bottom of your pin the same height, from the ground when level, as your original pin box? Essentially, is the MorRyde pin base the same height from the ground (when your rig is unhooked and level)? I really want this to work out, BUT, I don't want to tow nose high!
|
Linear Mode
