I have sutured my cuts with nylon wire ties. Cut a small slot on each side of the cut. Thread a wire tie through each side gently pulling the cut closed. Continue around the whole opening. I suggest loosely fastening the ties until the whole open is sutured. Then go around the perimeter and tighten them all up. Keeping them loose until you are done will give you plenty of room to work on the top ans will as the bottom
__________________
Fulltimer Domicile: Florida SKP Resort, Wauchula, Florida
2016 Montana 3611 RL Legacy - 2000w Solar, Victron whole house power, 1200ah Chins LiFePO4, RV Armor roof, Verizon 5G Home Internet
|