Took my 2009 Monty 3400, purchased in September, 2008 into the dealer for Warranty repairs on 6/15 and today, 7/11/09, I returned from my dealer without my Monty… Here’s why.
My landing gear kept blowing fuses, I even called Keystone and talked about the various discussions in these blogs, they told me to take it in and have my Dealer call Keystone for help. My dealer claimed I was using the wrong fuse!? I replaced it with a small green 30 amp plastic fuse. The Service manager said I needed a “slow burn” fuse and he said he would give me some extras. When I got here, he handed me some glass tube type fuses, and when I said that’s not the fuse, he gave me this story….. He stated by battery was low in voltage and needed water. I picked this unit up in September, took it on one weekend shakedown trip and stored it for the winter with the battery red disconnect pulled all winter. In the spring, I reconnected the red switch, and plugged it into 110v for a few weeks before our trip to Colorado Springs. All the time the battery gage in the trailer said the battery was fully charged. The dealer claims that since the battery was low, when I operated the landing gear I was pulling too many amps and would blow the fuse. I also told him that I was always plugged into the shore power, so how can I be pulling too many amps. He said it doesn’t matter, the landing gears operates solely on the battery? Also, asked him how could my battery be low on water in just 10months in service. He said because I had it plugged in so much I cooked away the water. Does any of this make sense? Anyway, according to my dealer, the reason I blew fuses was my battery was low in volts and water. So much for the battery gage in the trailer!
He told me to call Keystone on Monday. Does any of this make sense?
|