LED covers

[Phil Eyler]

Before I break something, I decided for once in my life to ask. I was trying to take the LED light covers off my 2015 Montana and couldn"t quite figure how they come off. Since I've been known to force and sometimes break things, I was hoping that somebody would share their knowledge and tell me how to remove these covers so I can clean out the bugs and not have to replace a cover or two. Thanks for your help.

[Fire5er]

If you are talking about the 4" puck lights they twist off. I had the same issue and had to ask the dealer.

[tony d]

Thanks for the info I was wondering the same thing.

[JandC]

They don't twist very far to come off. I have a few that twist off like they are suppose to and then I had a couple that wouldn't budge. The one that was "out" and I waited several months for a replacement ended up being wired backwards and not burnt out at all.

[Preston & Terri]

They're hard to get a grip on, I use a rubber jar opener or a pair of gloves with the rubber dipped palms and fingers. The notch is only about 1/2 in. long. Righty tighty - lefty loosey

[Preston & Terri]

Speaking of the led lights.... Only one in my rig has a switch on it (the one above the headboard), I'd like to swap out the ones above the sofas with individual switch models, does anyone know where to get them? Also, my bathroom lights are just not bright enough.

[Mudchief]

Those covers can be hard. Sometimes when the factory screws down the light fixture to hard it makes the cover hard to remove. Some of mine come off easy and others are hard. you have to push up on those very hard and turn at the same time. When at the factory a tech showed me how to fix it once you are able to remove it. There are some little tabs that the cover fits in and you just bend them down a little.