Go Back   Montana Owners Club - Keystone Montana 5th Wheel Forum > MOC on M.A.R.S. > Montana Problems, Problem Solving & Technical Help
Click Here to Login

Notices

Reply
 
Thread Tools Display Modes
 
Old 01-27-2019, 08:48 PM   #21
miton 5052
Seasoned Camper
 
Join Date: Apr 2018
Location: Kerrville
Posts: 51
M.O.C. #21569
We replaced our wonderful 4" king mattress still in it's original plastic bag, with a 12" memory foam from Amazon, and have never had a better nights sleep.it hangs 4" at the foot,and 3" on the sides, no carpentry required
miton 5052 is offline   Reply With Quote
Old 01-27-2019, 11:09 PM   #22
vipermanden
Montana Master
 
vipermanden's Avatar
 
Join Date: Apr 2016
Location: North Lake Tahoe
Posts: 561
M.O.C. #18510
We have two Golden Retrievers that are allowed up on the bed in the morning when we are waking up, and it gets real cozy with the two of us and two Golden's on our king size sleep number bed. Not to mention those two wheels that role under the bed when the slide comes in , were all bent and I made our dealer fix them to something more beefy, because the 4 of us weigh in around 480 pounds! plus the weight of the bed and the things we stored in that storage compartment below the bed!
__________________
2017 3820FK Legacy Edition full body paint Montana, For Sale this November, 2018. 2016 Ram 3500 long bed Dually Cummins Turbo with air bags
vipermanden is offline   Reply With Quote
Old 01-28-2019, 08:39 AM   #23
WeBeFulltime
Montana Master
 
WeBeFulltime's Avatar
 
Join Date: May 2011
Location: Hixson
Posts: 2,845
M.O.C. #11397
Quote:
Originally Posted by Texan View Post
Mine is like yours but I haven't seen it cause any problem for the mattress. Many have changed the mattress for the queen. If you are not full-timing this might be the best solution as it will fit much better and give you much more room in the B.R. to walk around.
What does full timing have to do with mattress size? We have been full timers 8 + years and used queen size in 3 different Montanas with no problems doing so. Are the mattress police looking for us?!
__________________
2018.5 Montana 3791RD
2012 F350 SRW 6.7 PSD

Full Timing since September 1, 2010
WeBeFulltime is offline   Reply With Quote
Old 01-28-2019, 10:09 AM   #24
Gmjordan1
New Member
 
Join Date: Sep 2018
Location: Allison Park
Posts: 4
M.O.C. #22607
Have the exact same problem w/ 2019 3731 fl. I was wondering if you extended it would it hit when slides are in
Gmjordan1 is offline   Reply With Quote
Old 02-06-2019, 11:02 PM   #25
jpwhite
Established Member
 
Join Date: Jan 2019
Location: TROY
Posts: 14
M.O.C. #23248
I checked the king bed in my 3120 the other day. The plywood base comes all the way to the end (foot) of the mattress. The corners are cut at 45 degrees, but otherwise the base extends the full width of the mattress side to side. The whole sheet lifts up to access under bed storage. I found that the plywood base at the head of the bed is narrower. It leaves a gap under the shelves. There is a piano hinge connecting the narrow board to the outer slide wall. Another storage compartment? I didn't want to pull the mattress off far enough to try and open it.
jpwhite is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:19 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.