|
12-13-2019, 07:39 AM
|
#1
|
New Member
Join Date: Feb 2019
Location: Fort Wayne
Posts: 6
M.O.C. #23422
|
Electric
I was recently told that my electric outlet is on wrong and that my black plugin gets loose due to gravity. I have a 380th. I've included a photo. Does this look right? Nevermind the bungie, I just put it on the hold it in straight. Thanks! ( photo loaded sideways)
|
|
|
12-13-2019, 08:39 AM
|
#2
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Can't see anything that would concern me.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
12-13-2019, 11:27 AM
|
#3
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,700
M.O.C. #12947
|
You need to remove the cover and rotate the actual socket so the cord hangs down instead of sideways.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
12-13-2019, 11:57 AM
|
#4
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
The covers hinge should be on top.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
12-13-2019, 12:32 PM
|
#5
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,522
M.O.C. #18081
|
Assume you are referring to the cord cap coming out of the outlet at a 90 degree angle. You can remove it with 4 screws and then rotate the outlet 90 CCW so that the cord will hang straight down toward the ground.
|
|
|
12-13-2019, 01:29 PM
|
#6
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Another fine example of the assembly line. Hard to imagine that someone would do such crappy work.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
12-13-2019, 03:13 PM
|
#7
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,522
M.O.C. #18081
|
This is a pretty common issue as the assemblers are not electricians and most likely do not know the orientation of the pins within the outlet.
|
|
|
12-13-2019, 04:50 PM
|
#8
|
Seasoned Camper
Join Date: Sep 2019
Location: Quartzsite, Arizona
Posts: 97
M.O.C. #24985
|
Kinda looks like another example of that fine Amish craftmanship I hear about as well as a great example of Keystones inspection process.
__________________
Kevin in Quartzsite, Arizona....It's an experience!
|
|
|
12-13-2019, 06:28 PM
|
#9
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Sorry I didn't pay attention to the orientation of the picture.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
12-13-2019, 06:32 PM
|
#10
|
Montana Fan
Join Date: Jan 2018
Location: Box Elder
Posts: 247
M.O.C. #21057
|
Looks like the plug is correct as the cord is hanging down. However the cover should be hinged at the top Easy fix Remove 4 screws and rotate it 90 degrees Problem solved!
__________________
2018 Montana High Country 331RL
2006 Ram 2500 SRW 4X4 Laramie Quad Cab 5 .9
Andersen Ultimate 20K Hitch Lippert Solid Steps Steady Fast stabilizes
Rex and Patsy
|
|
|
12-13-2019, 08:34 PM
|
#11
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,700
M.O.C. #12947
|
Actually, the cord is installed sideways. If you notice the leaves on the ground in the photo, they are down and the plug assembly is installed to the left.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
12-13-2019, 09:25 PM
|
#12
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,694
M.O.C. #24086
|
Before you remove the receptacle, take a picture of the pins AND mark the "tail" of the plug as it is connected. It does rotate in the socket just a little. Make sure it is rotated all the way before you mark it so when you disassemble it you know how much you need to rotate it before you reattach it.
Yeah, this picture is rotated too...
|
|
|
12-13-2019, 11:00 PM
|
#13
|
Montana Master
Join Date: Nov 2015
Location: Arlington
Posts: 1,522
M.O.C. #18081
|
The outlet is keyed for proper orientation. The installer just needs to know where that key belongs along the circumference of the plug. A sparky would know that but maybe so should an assembly line worker as well if trained or shown during training.
__________________
SOB
2015 Volvo VNL780 D13, iShift, 32k ET air hitch, Idle Free LiFePO4 APU
16.8KWhr LiFePO4, 2.52 kw solar, 10kva Victron split phase
|
|
|
12-18-2019, 01:46 PM
|
#14
|
Established Member
Join Date: May 2017
Location: Livingston
Posts: 14
M.O.C. #19907
|
Even the most rudimentary QC inspection at The factory would require the units to be plugged in and this mistake could be corrected. The same goes for the PDI at the dealer. It really makes one wonder.
Jim
|
|
|
12-18-2019, 03:24 PM
|
#15
|
Established Member
Join Date: Sep 2018
Location: Eliot
Posts: 14
M.O.C. #22629
|
my elbow point up
|
|
|
12-18-2019, 04:50 PM
|
#16
|
New Member
Join Date: Jul 2019
Location: DeFuniak Springs
Posts: 7
M.O.C. #24477
|
The cover is in the right position but the twist lock outlet is 180 degrees out. You need to take the assembly apart and turn the receptacle 180 degrees and reassemble with the cover in the current position.
|
|
|
12-20-2019, 08:43 AM
|
#17
|
Established Member
Join Date: Oct 2019
Location: McDonough
Posts: 10
M.O.C. #25121
|
Both our air conditioners were installed backwards so I wouldn’t doubt it
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|