|
11-03-2013, 01:04 AM
|
#1
|
Montana Fan
Join Date: Sep 2009
Location: Hanover
Posts: 335
M.O.C. #9710
|
Mor/ryde pin box
While winterizing the camper yesterday I noticed the king pin appeared to be bent back. I put a square up against the bottom plate and pin and sure enough there's about 1/4" gap between the square and bottom edge of the pin. What worried me the most was that it looked like the pin had actually pulled out of the plate on the front side. I decided to take the plate off to look at the welded side but didn't see anything wrong.. I did a quick search to see if anyone had ever posted this type of problem but didn't come across any. You can see a couple of photos in the johns photo link.
|
|
|
11-03-2013, 05:39 AM
|
#2
|
Montana Master
Join Date: Aug 2010
Location: Wheatland
Posts: 675
M.O.C. #10623
|
Hard to tell from the picture, but it appears to be a factory defect. Measure from the plate to the top of the first shoulder, front and back and I'll bet you'll measure a 1/4" difference. In other words, it doesn't look like the pin base was cut square before it was welded to the plate.
|
|
|
11-03-2013, 06:41 AM
|
#3
|
Montana Fan
Join Date: Sep 2009
Location: Hanover
Posts: 335
M.O.C. #9710
|
Not quite a 1/4" but close. Having the trailer for 4 years I'm pretty sure it wasn't always this way. The paint on the plate around the back side of the pin is flaking up which Leads me to believe its moved. Think I'm going to contact Morryde and see if they're willing to take a look, maybe sent it to them.
|
|
|
11-03-2013, 07:22 AM
|
#4
|
Montana Fan
Join Date: Apr 2013
Location: Lehigh Acres
Posts: 492
M.O.C. #13354
|
Quote:
quote:Originally posted by Johnnyg
Not quite a 1/4" but close. Having the trailer for 4 years I'm pretty sure it wasn't always this way. The paint on the plate around the back side of the pin is flaking up which Leads me to believe its moved. Think I'm going to contact Morryde and see if they're willing to take a look, maybe sent it to them.
|
I agree, contact them. They have been awesome with me whenever I contacted them.
|
|
|
11-03-2013, 07:28 AM
|
#5
|
Montana Master
Join Date: May 2011
Location: Fayetteville
Posts: 4,200
M.O.C. #11401
|
Contact Moryde for good answers.
|
|
|
11-03-2013, 07:29 AM
|
#6
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Same here, we had an issue with our IS and Mor/Ryde was very responsive.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
11-05-2013, 01:27 AM
|
#7
|
Montana Fan
Join Date: Sep 2009
Location: Hanover
Posts: 335
M.O.C. #9710
|
I called Mor/ryde just a few minutes ago. After looking at some pictures briefly they took my address and will be sending a new lower skid plate assembly today, no charge. Thank you Mor/ryde for the quick response and very courteous service!
|
|
|
11-05-2013, 02:28 AM
|
#8
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
That is great to hear. You pictures really told the story. Jim
__________________
2006 3000RK
2009 Ram 2500
|
|
|
11-05-2013, 03:38 AM
|
#9
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Good job John, glad they came through for you.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
mor/ryde pin box
|
grampachet |
Tow Vehicles & Towing |
6 |
02-27-2014 01:55 AM |
Mor Ryde
|
Bruce G. Lawrence |
Tow Vehicles & Towing |
20 |
11-13-2011 09:22 AM |
Mor/ryde IS
|
Wiesehan |
Additions & Improvements |
9 |
10-05-2010 02:36 PM |
Mor/Ryde Pin Box
|
mail2us |
Tow Vehicles & Towing |
10 |
08-05-2008 05:26 AM |
Mor-ryde pin box help
|
chieflawdawg |
Tow Vehicles & Towing |
13 |
10-12-2007 10:14 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|