Completed the dual circuit breakers for slides

[Art-n-Marge]

I just completed installing the parallel 50 amp autoresetting circuit breakers for the slideouts. Cost is way under $20 in parts and I still have wire and shrink wrap left over. Note I replaced BOTH circuit breakers so they are of the same age. So I now have an extra autoresetting breaker in my tool box.

This fix works great for the most part. No more starting and stopping of the slides as they are extended or retracted. However, I can still see that the largest slide is struggling since it stops once before proceeding. I think this problem is caused by the slide being slightly out of adjustment, so I'll have to check on this. The other slides are fine.

Here's my implementation:


Thanks to Don Reilly for sending me the documents on parts and installation!