|
10-27-2023, 11:34 AM
|
#1
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
2013 3402 bedroom slide
The mechanism for the bedroom slide has pulled loose and the slide is inoperable. Unfortunately we had to leave in a hurry last weekend and I didn't have an opportunity to look at it. Does anyone in the group know how the mechanism (steel framework is attached to the floor of the slide box? I'm going to have to take at least the mattress deck off for access. I couldn't see that far up in there. I'm thinking probably some kind of lags but could be through bolts with the heads covered by the black plastic on the slide exterior bottom. I've called my dealer, but their foreman hasn't returned my calls yet.
|
|
|
10-27-2023, 09:00 PM
|
#2
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,370
M.O.C. #4831
|
I would have thought a 2013 model used cable slides for the bedroom. At least my 2012 does. But if you have the hydraulic actuated slide this is a somewhat common problem. The hydraulic ram is attached to the bed frame and exterior wall. You will have to remove the plywood cover and it will be clear. There are many Threads here about fixing the bed and slide. A Search should uncover them. Here is one to get you started.
https://www.montanaowners.com/forums...ad.php?t=65828
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
10-28-2023, 09:34 AM
|
#3
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
So, I took it apart this morning and found my answers. First, it separated due to an undiscovered water leak. The entire outer edge of the slide is gone. Second, the mechanism is attached to the slide floor by four stove head bolts through the bottom and mechanism framework. As I am parked in the northern Michigan woods, my concern was getting the slide in. I was able to attach some 2x4 blocks to the remaining floor and then went out in the woods and milled an oak plank to lay over the framework and attach to those blocks. The plank has a kerf cut in it to encapsulate the cross bar on the framework. Slide goes in and out and able to get it home now. A little ingenuity will usually get you out of any situation. When I get a better connection, I'll try to post a couple pictures.
|
|
|
10-28-2023, 10:57 AM
|
#4
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,423
M.O.C. #21044
|
The guy in the video below replaces rotten bedroom slide floor and works with the bed slide mechnism. This may help you.
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
10-28-2023, 05:22 PM
|
#5
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
Thanks for the video link. Pretty much same as our situation but a bit worse. The cross bar pulled completely loose from the floor. He has given me some ideas as to the source of the water intrusion.
|
|
|
10-29-2023, 12:26 AM
|
#6
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,702
M.O.C. #12947
|
Our 2012 3402 also has the hydraulic bed slide. Fortunately no issue with water intrusion.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
10-29-2023, 06:10 AM
|
#7
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
Quote:
Originally Posted by rohrmann
Our 2012 3402 also has the hydraulic bed slide. Fortunately no issue with water intrusion.
|
I didn't think we had a problem either.....until we did. In hindsight going back to purchase, I wish we hadn't gone with the king mattress. Because it spans wall to wall, you can't see the floor of the slide. Everything I found damaged is hidden by the bed.
|
|
|
10-29-2023, 12:01 PM
|
#8
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,702
M.O.C. #12947
|
We had water leaks at all the slide end wall windows, one at a time. When the carpet got wet at the bed slide under the window, I went around the entire rig and sealed all the windows where the frame contacts the filon with silicone and haven't had any leaks since. Yeah, the king bed sure does take up a lot of room in this model.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
03-10-2024, 06:19 AM
|
#9
|
Montana Master
Join Date: Mar 2012
Location: Davison
Posts: 786
M.O.C. #12331
|
Resolved
It's been a while since I originally posted. The bedroom slide floor was rotted due to an unknown water leak. It also damaged the bottom of the slide wall. We took her into Camping World Houghton Lake where we bought her for repairs. New floor in the bedroom, repaired kitchen slide roof. They also did insurance repairs for us on the A/C ducting due to red squirrels getting in the attic area. Got her back yesterday good as new.(New ducting, new roof deck, replaced some damaged wiring, new fantastic fan, new roof membrane) I thought the charges that we paid for were very fair and they walked us through everything they did. Mike went above my expectations installing hardware cloth in areas to prevent those destructive little sh**s from getting in again. Although we've never used any other dealers for repairs, in reading others experiences with good repair centers, I'd rate CWHL right there with the best of them and recommend them for service to anyone in need
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|