Not sure what you are really asking, but here's my reply based on your post. If you are referring to the More/ryde suspension system and it has the wet bolt kit installed...there are fitting on the system that take grease from a grease gun. If you are referring to the dexter axles and the hubs/drums/bearings, then the answer is yes. I believe most montanas came with the E-Z Lube system and you need to follow directions in the owners manual or you can blow out the rear seal redering the brakes worthless, as in no stopping ability and spending way more money to correct the error. And don't let someone near your rig with an air powered grease gun. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|