Want to add LED strips to closets like in pantry

[penra]

The 3120RL has an LED strip that is motion activated in the pantry. I'd like to add that to both closets, any ideas where to find the parts? Do I need 12v or 120 or a combination?

[WeBeFulltime]

If it was me I would start by doing a search on Amazon and eBay for the lights and your available power supply where it is needed would determine 12 or 120v.

[jsb5717]

I did that very thing. I used these parts which I found very easy to use. I ran the light strips (which can be cut to length) just inside the door so that you can't see it directly. The light strip has a self-adhesive backing. I also used some thumb tacks to reinforce here and there for longevity. There are a lot of places to access the 12v and a lot of creative ways to run the wires so they can't be seen.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[penra]

Great tip, thank you!