|
05-02-2014, 03:26 PM
|
#1
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Super glide hitch question
I have a tool box behind the cab on my truck and am wondering when turning left will the release handle hit the box. If it did could I modify the handle to and rotate it to the rear of the truck for clearance.
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-02-2014, 03:32 PM
|
#2
|
Montana Master
Join Date: Jun 2010
Location: Colorado Springs
Posts: 3,335
M.O.C. #10496
|
Try it going very slowly. We have had zero issues with ours but we don't have a toolbox.
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|
|
|
05-02-2014, 03:48 PM
|
#3
|
Montana Master
Join Date: Nov 2005
Location: Paola
Posts: 5,739
M.O.C. #4961
|
I have that setup and have never had a problem.
__________________
Dennis & Linda Ward
Paola, Kansas
Montana 3735MK Legacy Edition
1200 watts of Solar
|
|
|
05-02-2014, 05:00 PM
|
#4
|
Montana Master
Join Date: Oct 2012
Location: Chilliwack
Posts: 1,520
M.O.C. #12935
|
Quote:
quote:Originally posted by Drifty1
I have a tool box behind the cab on my truck and am wondering when turning left will the release handle hit the box. If it did could I modify the handle to and rotate it to the rear of the truck for clearance.
|
I don't know what kind of a hitch you have but no part of any that I have ever seen rotates.. The pinbox rotates on the stationary hitch and the release handle remains in the same place no matter what.
Maybe I am missing your meaning, if so I am sorry, otherwise I say you have no worries since the hitch remains in the same position except for the up down and minimal side tilt of the head.
|
|
|
05-02-2014, 05:07 PM
|
#5
|
Seasoned Camper
Join Date: Jan 2013
Location: Twin Falls
Posts: 50
M.O.C. #13130
|
I have a box in mine as well and it works out well. When you get the hitch in just move it by hand to check it out. It should slide back and not even come close.
|
|
|
05-02-2014, 05:10 PM
|
#6
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Ed the superglide hitch uses a capture plate mounted on the 5th wheel pin on the trailer. This makes the hitch head and the pin box a solid piece that rotates the hitch head when you make turns causing the head to move away from the back of the truck by using a cam action. Since the head in the truck bed rotates the handle can move forward when turning.. Hope I am describing this correctly....
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-02-2014, 06:44 PM
|
#7
|
Montana Master
Join Date: Oct 2012
Location: Chilliwack
Posts: 1,520
M.O.C. #12935
|
Drifty1 I was not familiar with the Superglide hitch, after watching a video on their operation I see what you mean. I have never owned a SB truck and have never had to worry about the hitch. My daughter and her husband have both damaged their SB truck pulling their horse trailer but that is a gooseneck hitch.
I will keep my LB for this and many other reasons but thanks for the education.
|
|
|
05-02-2014, 06:44 PM
|
#8
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,690
M.O.C. #12947
|
The handle will never come close to the box. As the head rotates, it travels to the rear, taking the handle with it. If you are talking about a conventional hitch, which it is assumed you are not, of course the handle doesn't move. We have the 18K Superglide and have a tool box in our standard bed truck.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
05-02-2014, 07:06 PM
|
#9
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Thanks for the feed back. Going to look at one tomorrow so I will get a better look..
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-03-2014, 01:57 AM
|
#10
|
Seasoned Camper
Join Date: Oct 2010
Location: boerne
Posts: 57
M.O.C. #10842
|
A little off subject, but for people with the super glide be careful not to leave loose items in truck bed. I left an ax head without a handle back there and it got under the hitch where the cam action occurs and I was in a park making a sharp turn when I heard a loud pop, got out and inspected, found the ax head and a small chip in the cam track. That has probably been at least four years ago and it has worked perfectly since. I am just careful not to leave anything loose back there. I do have a tool box and as stated handle never gets close.
|
|
|
05-03-2014, 04:47 AM
|
#11
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Well after all the feed back I am taking a road trip up to Seattle today to look at an 18k unit.. The guy wants $650 and it has made 1trip from Colorado to Seattle. He has paperwork from camping world for 2500 installed in March.. Wish me luck..
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-03-2014, 07:54 AM
|
#12
|
Montana Master
Join Date: Oct 2012
Location: Box Elder
Posts: 4,690
M.O.C. #12947
|
Better grab that hitch quick!! They are really well made, and unless he had a dozer crush the hitch, that's a great deal.
__________________
Bob & Becky
2012 3402RL
2012 Chevy 2500HD D/A CC 4WD
|
|
|
05-03-2014, 09:04 AM
|
#13
|
Established Member
Join Date: Jan 2014
Location: Henderson
Posts: 13
M.O.C. #14004
|
Pappy, thanks for the heads up about leaving loose stuff around the hitch.
|
|
|
05-03-2014, 09:46 AM
|
#14
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Well we are the proud owner of a new hitch.. It came with the standard rails and mounting gear but I do not need that. Looks like brand new.. Now I need a plate to fit a 1621 pinbox.
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-03-2014, 12:36 PM
|
#15
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,945
M.O.C. #5651
|
You will have to get a bracket that attaches to the frame under the bed of the truck. Then you have to drill and attach it to the frame. I had to get this when I went from my old 2004 to a 2012, as the frames had changed. I think it went for $400 or $600 at a Chevy dealer installed.
Oh, FYI I kept the Hitch that goes in the bed from my old truck, but still had to get the correct mount for the frame.
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
05-03-2014, 01:49 PM
|
#16
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
The model 2900 will fit right onto the standard rails that already installed. I am 99.99% sure but will not get my truck back from body shop till late next week.
Link to photo https://picasaweb.google.com/1136486...39793921329474
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-04-2014, 10:03 AM
|
#17
|
Montana Master
Join Date: Nov 2012
Location: Rancho Santa Margarita
Posts: 633
M.O.C. #13025
|
When you get your required capture plate that fits onto your pinbox, get the one that bolts on. I would not recommend welding it on, because if a different TV, such as if you are disabled needs to tow the trailer, you can remove the capture plate.
__________________
Russ and Linda, So. California
2004 Chevy Silverado 2500 HD, D/A, SRW, SB
2005 2955RL, Pullrite Superglide 16K hitch. Bridgestone Duravis R500 tires. EZ Flex Equilizers with wet bolts.EMS HW50C, Disk brakes
|
|
|
05-04-2014, 10:07 AM
|
#18
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
Quote:
quote:Originally posted by h2ojocky
When you get your required capture plate that fits onto your pinbox, get the one that bolts on. I would not recommend welding it on, because if a different TV, such as if you are disabled needs to tow the trailer, you can remove the capture plate.
|
I ordered the bolt on plate this morning. Now all I need is a truck..
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
05-05-2014, 05:56 AM
|
#19
|
Montana Master
Join Date: Jan 2009
Location: Centerville
Posts: 1,350
M.O.C. #9051
|
Very nice find $650 is a steal. Yes the ISR series 2900 fits the standard bed rails, you should be ready to go. Best price I could find on the 2900 was $1111.11 from Tweety's free shipping.
|
|
|
05-05-2014, 12:33 PM
|
#20
|
Montana Master
Join Date: Jul 2009
Location: Olympia
Posts: 1,058
M.O.C. #9441
|
I have the paperwork and it was installed in Colo. on 3/14/2014. As you can see in the photo even the brackets for under the bed look like new. I think he paid about $1500.00 at camping world. So if every thing works as planed I will have a Reese slider for sale with 1999-2010 mounting brackets for a Chevy I believe.
__________________
2020 Ram 3500, 2022 Luxe 38GFB,2500w Solar with Victron equipment, Gen Y Pinbox
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|