|
11-10-2021, 09:45 AM
|
#1
|
Montana Fan
Join Date: Oct 2018
Location: Grandview
Posts: 192
M.O.C. #22947
|
kitchen slide out not going in.
I have a 2019 Montana 3020.When I was going to leave the cg in Tucumcari, my kitchen slide was not going in straight the tv side of it went out just so much, while fridge side was going in.
I t worked great yesterday, th only thing I did since yesterday was filling up the tank. It is right below the side which doesn't go in. suggestions?
|
|
|
11-10-2021, 10:32 AM
|
#2
|
Montana Fan
Join Date: Oct 2018
Location: Grandview
Posts: 192
M.O.C. #22947
|
This is the side of the slide which is not working r
ight.
|
|
|
11-10-2021, 10:34 AM
|
#3
|
Montana Fan
Join Date: Oct 2018
Location: Grandview
Posts: 192
M.O.C. #22947
|
Anyone, knows a good mobile rv repair in Tucumcari?
|
|
|
11-10-2021, 11:30 AM
|
#4
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
From your picture it looks like the bolt is missing that connects the square rod to the gear pack. They have been known to shear.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
11-10-2021, 11:37 AM
|
#5
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
If that is it, it can be a pretty easy fix. Extend the slide out. The side that started coming in will go to full extension. Rotate the gear pack just enough to line up the holes in the rod with the holes on the shaft of the gear pack. You'll have to guess at the bolt size. I'm thinking it is 1/4 or 5/16X1.5 grade 8 but not sure. It has to be short enough so it doesn't contact the frame beam as it rotates.
__________________
2006 3000RK
2009 Ram 2500
|
|
|
11-10-2021, 12:18 PM
|
#6
|
Montana Fan
Join Date: Oct 2018
Location: Grandview
Posts: 192
M.O.C. #22947
|
Thanks guys, I did see the broken bolt, I put another one on, now it works again. Thanks again.
|
|
|
11-10-2021, 06:10 PM
|
#7
|
Montana Master
Join Date: Jun 2018
Location: Carson City
Posts: 2,017
M.O.C. #21963
|
Quote:
Originally Posted by jimcol
If that is it, it can be a pretty easy fix. Extend the slide out. The side that started coming in will go to full extension. Rotate the gear pack just enough to line up the holes in the rod with the holes on the shaft of the gear pack. You'll have to guess at the bolt size. I'm thinking it is 1/4 or 5/16X1.5 grade 8 but not sure. It has to be short enough so it doesn't contact the frame beam as it rotates.
|
Nice find!!
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|