new kitchen faucet

[jcurtis934]

Installed a new moen kitchen faucet as what came in the unit was getting ragged looking. Wouldn't you know it...when I went to loosen the nut underneath, I found that it was partially covered by the cabinet frame. So I had to dis-assemble it from the top and could only get a partial bite on the bottem nut. What should have been a ten minute job turned into a couple hours. Really? What does the factory think when they are designing/building a cabinet for the sink...my guess is like "they should be glad we got a faucet on the sink!". Okay, now I feel much better. John

[1retired06]

Sounds familiar!

[bigskyjimmy]

Yeh had that problem on my 2012 and 2015 but I found a special tool at the hardware store that did the trick to get that nut and it works great https://www.amazon.com/Superior-Tool...ds=basin+buddy