bigbird

[rich6506547]

We have a 3400 with wraparound island the faucet is on the out side. When doing dishes some time water gets on cabinet below faucet anybody put up a guard or something to stop the water getting on cabinet ruining finish on doors.

[mlh]

I don’t have the same camper but I put up a guard to keep stuff from falling behind the slide on my HC. You have Corian counter tops like my HC. I cut a piece off of one of my sink covers and used some of the Corian special glue to bond it on. If you go this route you will need a special glue mixing application tool that you can only get from a cabinet shop. Once finished the bonded area will be stronger than original and there ain’t no getting it off. You will probably need someone with a good table saw to cut it and the bevel the edges. Once done it will look original.
Lynwood

[rich6506547]

If you could post some pix i would like to see it sounds great. I bet others have same problem I live in mine full time so sink gets a Lot of use great idea.

[mlh]

I’m sorry but I don’t have any pictures I can post. That is something I just don’t do. Set one of your sink up back there and see what it looks like. I think mine is about an inch or so high. You may like it on top of your counter top or on the back side. Try it both ways to see which way you like.
Lynwood