 |
03-26-2016, 03:27 PM
|
#1
|
|
New Member
Join Date: Feb 2016
Location: Inman
Posts: 4
M.O.C. #18300
|
Hot Water Heater
We are on our maiden trip in our 2016 Montana. We have run all the antifreeze from the faucets and turn the by pass to the hot water heater to the off position and filled the tank, let it sit to make sure it was full. But no hot water. Looking through the manual, we found nothing to help. Any suggestions.
Thanks Rick
|
|
|
|
03-26-2016, 03:45 PM
|
#2
|
|
Montana Master
Join Date: Apr 2006
Location: Mesa az
Posts: 2,952
M.O.C. #5651
|
Are you getting no hot water flow, or just cold water from it?
__________________
Tom and Gail
2013 Mountaineer 362
2012 Silverado 2500
|
|
|
|
|
03-26-2016, 04:33 PM
|
#3
|
|
New Member
Join Date: Feb 2016
Location: Inman
Posts: 4
M.O.C. #18300
|
Yes, we are only getting cold water through the faucets
|
|
|
|
|
03-26-2016, 05:04 PM
|
#4
|
|
Established Member
Join Date: Feb 2016
Location: Pomaria
Posts: 20
M.O.C. #18262
|
Check to see if your model hot water heater has an external switch also. Many do on Keystone products. Pop the cover open on the side of the camper and look for a switch. I believe usually on the lower left side of the hot water unit.
|
|
|
|
|
03-26-2016, 06:14 PM
|
#5
|
|
Montana Master
Join Date: Mar 2015
Location: Sequim
Posts: 527
M.O.C. #17176
|
Our 2016 has a switch on the outside it is in the lower left corner of water heater. That switch has to be on, then you can control from the inside.
__________________
Dan & Sandy Huhn
2016 Montana 3720 2015 Chevy 3500 SWD Duro Max
Prev 2012 High Country 313RE 2012 Chevy 2500 DMax
|
|
|
|
|
03-27-2016, 05:11 AM
|
#6
|
|
Montana Master
Join Date: Oct 2006
Location: McKinney
Posts: 7,165
M.O.C. #6433
|
Did you try it on both electric and propane? Or just electric?
__________________
Bill & Patricia
Riley, our Golden
2007 3075RL (recently sold, currently without)
|
|
|
|
|
04-02-2016, 06:10 PM
|
#7
|
|
Montana Fan
Join Date: Aug 2012
Location: Blackduck
Posts: 315
M.O.C. #12753
|
Water heater by-pass valve may not be turned in the proper direction. Valve should be located in the convenience center with the other valves. If the heater did not fill with water and you turned on the electric element, the element my have burned out.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Disclaimer:
This website is not affiliated with or endorsed by Montana RV, Keystone RV Company or any of its affiliates. This is an independent, unofficial site.
All times are GMT -6. The time now is 08:39 AM.
Linear Mode
