My 120vac wall sconce has a square shade that has the normal "unscrew the knob on top of it", just like household lamps have had since being converted from gas. If yours is a variation of the pendant fixtures over my island...you have to take out the bulb, unscrew the socket which will allow the glass shade to separate from the lamp fixture. Of course, you will have to cut the wires and take it off the wall to do this. Hope this helps. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|