3295RK

[Bill Brown]

I would like to put 110 volt receptacles on my bedroom slide, in the base below the mattress, each side, so I can use an electric blanket, etc, without running the extension cord over to the outlets by the dresser?? Buzz, I know you have done this before but I've forgotten how you ran it. I don't want to cut alot of holes.
Bill Brown

[mhs4771]

We have an outlet in the Front Closet, so I installed a surface mount box with outlet on each side of the bed (on the outside wall), drilled thru the bed plateform sides to route the conduit. Put a pig tail on the box on the side closest to the closet and just plug into that outlet. Just have to remember to unplug that pig tail cord before retracting the slides (Don't ask me how I know). Works for up without getting into the underside of the slide to route AC lines.

[Devildog]

On the 3295, there is an outlet already next to the bed near the slide out next to the closet (close to the headboard). Use it for my cpap and electric blankets now.

[Devildog]

On the 3295, there is an outlet already next to the bed near the slide out next to the closet (close to the headboard). Use it for my cpap and electric blankets now.

[H. John Kohl]

My 07 3295RK does not have an outlet near the bed. Only under the TV area on the curb side wall.
I had an extra breaker installed and put an outlet in the basement.
I plan to extend that 120VAC feed to the front of the trailer and pass the wire up the same hole that has the hydraulic lines coming up under the bed. The use flexible wire from a junction box on the floor over to the side of the bed where and outlet would be mounted.

Jim Fischer helped me with this idea and he can describe the correct flexible wire.
Good luck.