|
01-30-2022, 08:55 AM
|
#1
|
Seasoned Camper
Join Date: Jul 2020
Location: Franktown
Posts: 51
M.O.C. #26693
|
Furnace, Heatpump or incommand?
We have a 21 Montana legacy 3120 that has been giving us problems with the furnace cutting off after 1-5 minutes and changing over to heatpump even though incommand has been selected for gas and the temperature setting is at least 8 degrees higher than sensor in rig. Keystone replaced board on dometic furnace and sail switch was replaced as well. We have had unit since Oct 2020. Have not been in real cold weather much so hasn't been a big issue. I thought it was fixed until last night and temps were 30 degrees in Florida. Reading the forums I saw that Dometic ac had a known issue with a controller in ac chaseway. Not our problem as we have coleman units. I was reading in Keystone forum and someone said to replace the autoreset 15 amp blade fuse with a regular one. I did this and the furnace ran for 20 minutes than I cut it off. Temp setting was 80 degrees and sensor said 69 to start. Seems like this may have fixed the problem.
Just want to share and see if others are having same or like issue.
Thanks!
__________________
Charles Brandt
2021 3120rl legacy edition with generator
splendide washer/dryer stacked
2019 chevy 3500 diesel + Pullrite super glide hitch
|
|
|
02-03-2022, 01:48 PM
|
#2
|
New Member
Join Date: Feb 2022
Location: Cedar Hill
Posts: 2
M.O.C. #30442
|
Thank you for your post. I have a 2022 Montana 3931FB legacy edition and it was having the same issues. It was working ok but started kicking off after 30 seconds when it got colder. I'm in Texas, it has been snowing here and got into the teens, unbelievable.
|
|
|
02-03-2022, 02:18 PM
|
#3
|
Seasoned Camper
Join Date: Jul 2020
Location: Franktown
Posts: 51
M.O.C. #26693
|
Please let me know if this worked for you. Thanks!!
|
|
|
02-03-2022, 02:35 PM
|
#4
|
New Member
Join Date: Feb 2022
Location: Cedar Hill
Posts: 2
M.O.C. #30442
|
Quote:
Originally Posted by Cbrandt79
Please let me know if this worked for you. Thanks!!
|
Yes it did, so far so good. I am very happy that it did. I was breaking out the portables thinking this is not going to work for me. It's 66 by a window and the zone says it's 74. The floor heat is the biggie when it's cold like this, when the electric is just running no heat comes from the floor. I'm new to the Keystone Montana's and am finding my way with the HVAC system and now off to the TV's and sound system, that stuff isn't working right either.
|
|
|
02-03-2022, 05:02 PM
|
#5
|
Seasoned Camper
Join Date: Jul 2020
Location: Franktown
Posts: 51
M.O.C. #26693
|
So glad that this may work for you!!! Stay warm
|
|
|
02-03-2022, 08:34 PM
|
#6
|
Montana Master
Join Date: Aug 2004
Location: Livermore
Posts: 5,148
M.O.C. #1920
|
Our dealer automatically changes that fuse out.
__________________
Ron and Terrie Ames - MOC #1920/KF0NTA
2021Montana 3230CK Super Solar Legacy Package
2021 Ram 3500 Laramie Longhorn, BIM Charging
4x4, SRW, LB, Crew Cab, Pullrite 3900 Hitch
|
|
|
02-06-2022, 01:57 PM
|
#7
|
Montana Master
Join Date: Jun 2020
Location: Qualicum Beach
Posts: 665
M.O.C. #26399
|
Quote:
Originally Posted by Cbrandt79
We have a 21 Montana legacy 3120 that has been giving us problems with the furnace cutting off after 1-5 minutes and changing over to heatpump even though incommand has been selected for gas and the temperature setting is at least 8 degrees higher than sensor in rig. Keystone replaced board on dometic furnace and sail switch was replaced as well. We have had unit since Oct 2020. Have not been in real cold weather much so hasn't been a big issue. I thought it was fixed until last night and temps were 30 degrees in Florida. Reading the forums I saw that Dometic ac had a known issue with a controller in ac chaseway. Not our problem as we have coleman units. I was reading in Keystone forum and someone said to replace the autoreset 15 amp blade fuse with a regular one. I did this and the furnace ran for 20 minutes than I cut it off. Temp setting was 80 degrees and sensor said 69 to start. Seems like this may have fixed the problem.
Just want to share and see if others are having same or like issue.
Thanks!
|
Is there not a setting choice for furnace only? Or turn off the AC/Heatpump breaker.
__________________
2018 Keystone Montana 3811MS
2017 Ford F450 diesel dually
600AH Battle Born Lithium Batteries, 1,080 watts solar
3,000 watt hybrid inverter with 120A charger
|
|
|
02-06-2022, 02:10 PM
|
#8
|
Established Member
Join Date: Apr 2016
Location: Plano
Posts: 13
M.O.C. #18451
|
Glad to read this thread. I’ve been having similar problems off & on for a couple of years but am rarely in cold weather so have been simply putting up with it.
|
|
|
02-06-2022, 07:45 PM
|
#9
|
Montana Fan
Join Date: Nov 2020
Location: Gulfport
Posts: 105
M.O.C. #27628
|
For furnace only with iN·Command, set to gas with fan in off setting. Auto setting allows heat pump to come on.
__________________
2021 Montana 3231CK, Legacy, Super Solar Flex, Dual Pane Windows, Slide-out Awnings
2021 Dodge RAM 3500 4x4 Limited 6.7 HO DRW, Trailer TPMS, B&W Companion Hitch
|
|
|
02-09-2022, 05:21 AM
|
#10
|
New Member
Join Date: Nov 2021
Location: St. Augustine
Posts: 6
M.O.C. #30127
|
Just purchased 2022 HC 331RL and experimenting with furnace & heat pump - can you explain where this "autoreset 15 amp blade fuse" is located?
|
|
|
02-09-2022, 07:41 AM
|
#11
|
Montana Master
Join Date: May 2019
Location: Alton
Posts: 2,703
M.O.C. #24086
|
Quote:
Originally Posted by LARICE13
Just purchased 2022 HC 331RL and experimenting with furnace & heat pump - can you explain where this "autoreset 15 amp blade fuse" is located?
|
In your fuse panel. It's the large 15A black one next to all your regular 15A blue ones.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|