|
|
09-30-2018, 11:44 AM
|
#1
|
New Member
Join Date: Sep 2018
Location: Twin Lake
Posts: 9
M.O.C. #22626
|
Tonneau cover susgestion
hello all,
We are getting closer in purchasing our Montana. We've been taking small steps so far. We recently sold our F150 and will be picking up our 2017 F350 supercab diesel tomorrow.
This vehicle will be parked outside. As a means to protect the fifth wheel hitch in the truck bed, we are wanting to purchase a tonneau cover. Of what is out there, I like the roll up covers.nthis still will work better for us as when not pulling the fifth wheel, we will be carrying a few kayaks in the bed.
With so many manufactures out there, do you have any recommendations? The American EZ roll tonneau cover looks like it should work.
Any suggestions would be appreciated
CPat
|
|
|
09-30-2018, 12:26 PM
|
#2
|
Montana Fan
Join Date: Oct 2017
Location: Fulton
Posts: 456
M.O.C. #20688
|
We have the Truxedo LoPro reason I like it is it only sits 3/4” above bed rails. It has a flat black finish, easily installed no holes to drill. We carry a toolbox in the bed and rolls nice and tight to the cab allowing lid to open fully. Around $500
__________________
Wayne & Malinda
2018 Montana 3731FL
MORryde IS/DiscBrakes
2017 F450 DRW KR 4x4
|
|
|
09-30-2018, 01:30 PM
|
#3
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Truxedo Edge has worked well for us.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
09-30-2018, 01:44 PM
|
#4
|
New Member
Join Date: Sep 2018
Location: Twin Lake
Posts: 9
M.O.C. #22626
|
Thanks for your reccomdations. It appears that most of these are similar. Prices go up based on the extent of the warranty and ease of adjustment. I like the Lo Pro as it doesn't sit that tall
|
|
|
09-30-2018, 06:11 PM
|
#6
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
We’ve used a Gator for the last few years and it’s worked well.
|
|
|
09-30-2018, 10:32 PM
|
#7
|
Seasoned Camper
Join Date: Oct 2017
Location: South Jordan
Posts: 80
M.O.C. #20689
|
I have the American roll-up cover and it works and looks great! Realtruck.com usually has the best pricing for American covers. Something that must be considered is the how far the Tonneau cover mounting rail extension protrudes into the bed area. Some pin boxes will hit the cover mounting rails during sharp turns. Because I use an Andersen hitch with the box ball socket mounted forward of the king pin (extending the pin box), I have to be very careful (1/2") clearance of pin box during sharp turns. If I had to do it all over again, I would go with an American flip top tri-fold Tonneau cover. A tri or quad fold cover would be the best option for those with not much pin box clearance to side of bed. There are no bed mounting rails required on most top mount tri fold tonneau covers.
|
|
|
10-01-2018, 08:04 AM
|
#8
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
|
I have a GMC long bed and have the GM trifold cover. It stays covered when not towing to keep my firewood nice and dry between trips and when camping. I can fold and unfold in a matter of seconds. If I need it, I put the blue boy on top and strap it down. Plenty of room between it and the hitch while towing. Best part is I bought two of them used off craigslist for $100. Best $100 buck I ever spent.
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
10-01-2018, 09:03 AM
|
#9
|
New Member
Join Date: Sep 2018
Location: Twin Lake
Posts: 9
M.O.C. #22626
|
Thanks everyone. The feedback on how far the rails will extend the box is great. Our thinking for the roll up is when we have kayaks in the bed, the roll up won't affect our visibility from the rear window.
Plan to pick up the truck later today! Followed with looking at some roll up covers at a nearby dealer. With the ease of installation I will be ordering the roll up on line, once I make that decision
CPat
|
|
|
10-01-2018, 11:10 AM
|
#10
|
Seasoned Camper
Join Date: Feb 2018
Location: St. Louis
Posts: 55
M.O.C. #21214
|
Fiberglass BakFlip. Folds all the way up for full bed access, can travel with it folded down to cover the stuff closest to the bed, and still clear the hitch and trailer.
|
|
|
10-01-2018, 11:25 AM
|
#11
|
Established Member
Join Date: Oct 2009
Location: Germantown
Posts: 41
M.O.C. #9790
|
Pace Edwards Electric Tonneau
|
|
|
10-01-2018, 05:00 PM
|
#12
|
Montana Fan
Join Date: Sep 2016
Location: West Melbourne
Posts: 310
M.O.C. #18980
|
Truxedo LoPro
__________________
Butch and Kathy
2016 3160RL Legacy, Sailun S637, Centramatic Balancers, 2-T105s, Amish Refrigeration, ARPrv, SoftStartRV, FlexArmor roof
2016 F350 6.7L SRW
|
|
|
10-01-2018, 06:36 PM
|
#13
|
New Member
Join Date: Sep 2018
Location: Twin Lake
Posts: 9
M.O.C. #22626
|
Thanks. I’m leaning towards the Tuxedo Pro X15. The truck is too big to fit into our garage and the cover won’t require any maintenance. I went to a local RV parts store and offers it for less than on line with installation included.
We picked up the F350 Lariet diesel today so the cover is next.
Thanks everyone
|
|
|
10-01-2018, 06:48 PM
|
#14
|
Seasoned Camper
Join Date: Oct 2017
Location: South Jordan
Posts: 80
M.O.C. #20689
|
CPat, Congrats on the new truck! Be sure to measure the length of your 5'er pin box (center of pin to rear) and compare to the total inside bed width (between the Pro X15 bed mount rails) and divided by two. If cover mounting rails allow for 2 or more inches of pin box clearance (during sharp turns) you'll be fine. The Tuxedo Pro X15 looks like a good cover!
|
|
|
10-01-2018, 06:55 PM
|
#15
|
New Member
Join Date: Sep 2018
Location: Twin Lake
Posts: 9
M.O.C. #22626
|
Thank you. It’s an 8’ box with a 164” Wheel base so hopefully I will be good. More updates later as we plan to go look at fifth wheels this weekend.
CPat
|
|
|
10-02-2018, 05:09 AM
|
#16
|
Montana Master
Join Date: Aug 2009
Location: Grand Rapids
Posts: 1,896
M.O.C. #9561
|
truxport-tonneau
good price and quality
get a flush tool box, i.e UWS box. do not waste your money on a cheap Lund box.
|
|
|
10-07-2018, 02:07 PM
|
#17
|
Montana Fan
Join Date: Sep 2018
Location: Reno
Posts: 293
M.O.C. #22620
|
I live in snow country so I have a Truxedo Sentry, hard roll-up cover. Up side, cannot get into truck bed by cutting cover with a knife, down side, I can't see my hitch when I hook up when it's rolled up behind the cab. I've learned to hitch up without seeing the hitch the same as semi drivers.
|
|
|
10-07-2018, 02:28 PM
|
#18
|
Montana Master
Join Date: Jan 2008
Location: Portland
Posts: 1,107
M.O.C. #8045
|
Very happy with my Lopro. Be sure to keep your receipt. My first one deteriorated after 10 years (the Velcro quit holding) they would have replaced with their warranty but I had no receipt, having bought it while living in Canada.
Then after 10 years, while driving through Montana a big side gust of wind tore it off, but my insurance replaced it. All things work together....
|
|
|
10-07-2018, 02:57 PM
|
#19
|
Seasoned Camper
Join Date: Mar 2018
Location: Elmira
Posts: 71
M.O.C. #21376
|
just don't get a hard cover they are a pain in the a... when hooking up or towing as they cover the rear window
|
|
|
10-07-2018, 03:29 PM
|
#20
|
Montana Master
Join Date: Jan 2008
Location: Portland
Posts: 1,107
M.O.C. #8045
|
I tried a trifold and the seams leaked with our PNW rains And besides that, since I have a short bed and a moride hitch I did not have room to use the cover while towing.
Thankfully the refunded the purchase price.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|