![Reply](/forums/images/mo/buttons/reply.gif) |
|
11-16-2019, 02:30 PM
|
#1
|
Montana Master
Join Date: Dec 2010
Location: Sioux Falls
Posts: 664
M.O.C. #10985
|
entry steps
Does everyone but me like the new steps that rise into the doorway. They are rigid but need camper to be set at a suitable height or they won't go down far enough for the doors to work. forgetting them down when setting ;up will bend everything when the level does its thing. I would like to replace them with something like I used to have on older Montana. 3 steps that folded and slid underneath.
Any suggestions anyone?
|
|
|
11-16-2019, 05:28 PM
|
#2
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 953
M.O.C. #19630
|
I have the LCI steps on my older Montana and really like them. Solid with a large top step.
Yes they do require you to be mindful of them when leveling and hooking up. When we are nose high in a camping spot and the steps need more clearance I just dig a little to make them fit. No biggie. Then again I could put the old steps back on and drag them and bend them when I enter and exit steep driveways. Oh well, just one of life's tradeoffs.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
11-16-2019, 05:41 PM
|
#3
|
Montana Master
Join Date: Jan 2018
Location: Austin
Posts: 2,415
M.O.C. #21044
|
Steps
The bottom legs are adjustable. Push the catch pin out and adjust in or out to fit the terrain then put the pin back in. I have to adjust mine all the time
__________________
MikenDebbie Aggie ‘77 in the sticks near Austin TX
2019 Chevy 3500 High Country DRW
2018 Montana 3921FB
Aussie Gus + Texas Heeler Jimmy
|
|
|
11-16-2019, 06:03 PM
|
#4
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
When we bought our new rig we told them that the fold in steps were a deal breaker since we had porches at both our homebases. They called Keystone and got a kit to install the LCI steps we wanted. The connections were still back there and all they had to do was cut the hole in the siding and installed the steps. the kit even came with a gasket to edge the hole.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
11-16-2019, 09:20 PM
|
#5
|
Montana Master
Join Date: May 2017
Location: South East NC
Posts: 1,768
M.O.C. #19865
|
Quote:
Originally Posted by DQDick
When we bought our new rig we told them that the fold in steps were a deal breaker since we had porches at both our homebases. They called Keystone and got a kit to install the LCI steps we wanted. The connections were still back there and all they had to do was cut the hole in the siding and installed the steps. the kit even came with a gasket to edge the hole.
|
Great news! I'll get busy on that next week. I've seen aluminum 4 step folding steps. I want to check out. The doorway step would make me happier in the landfill.
__________________
John & Patty
2022 3855 BR
2019 Lariat F350 4X4 Dually
|
|
|
11-16-2019, 07:44 PM
|
#6
|
Site Team
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,362
M.O.C. #4831
|
If, as Dick wrote, the saddle that holds the steps is still there but covered by J wrap, then there is another alternative. The Torklift Glowstep has height adjustment up the wazoo. The top of the steps have three settings (about an inch each), and the bottom step has five 1" individually justifiable legs. Plus they won't extend out into your neighbor at a storage lot. They are solid as a rack when extended.
Who knows, they may now have replacements for your exisitng steps. Check their web site or even give them a call to see what all they have.
There are several of us here who them. It is the best thing I ever did to improve the Montana.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB
|
|
|
11-17-2019, 06:01 AM
|
#7
|
Montana Master
Join Date: Aug 2015
Location: Mena
Posts: 504
M.O.C. #17723
|
2X with Carl n Susan.
The 'new' glowstep that can replace your existing ones without modifications are GlowStep Revolution Uprising.
seen here: https://www.torklift.com/automotive/...ution-uprising
__________________
Ron & Rhonda
2021 3230CK Montana Legacy w/ Super SolarFlex
(old rig) 2015 Montana 3611RL 8K I.S., Disk Brakes, Sailun Tires
2015 F350 XLT Crew Dually 20K B&W Companion
|
|
|
11-21-2019, 05:56 PM
|
#8
|
Montana Fan
Join Date: Feb 2018
Location: Arlington
Posts: 136
M.O.C. #21176
|
I watched the video on the glowstep I like those better than the MorRyde steps. I might switch to those when mine need to be replaced.
__________________
2011 Volvo 780 485 HP/1750 TQ 13 Speed 32000 lb ET air ride hitch
2016 Montana 3820FK Legacy package
|
|
|
11-21-2019, 05:07 PM
|
#9
|
Established Member
Join Date: Jan 2019
Location: Patterson
Posts: 38
M.O.C. #23243
|
I'm not a fan of the new steps but for us it's not that big of a deal to switch them out.
__________________
Dave and Linda Stubbs
2020 3700 LK
2019 F350 DRW
|
|
|
11-21-2019, 05:52 PM
|
#10
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,658
M.O.C. #9969
|
We had the MORryde Step Above installed several years ago. And while I really like them, they can present problems if you travel alot. Be careful in an older Interstate Rest Area, if someone pulls in next to you to close, you can't raise them. Or if parked on sand/dirt, yet have a really nice patio that is raised well above ground level you can have an issue.
So I drilled out the rivets between the steps and the mounting hinge and installed pins. Now when we leave our Winter site of 6 months, those steps stay in storage and we use our OEM Fold out Steps during our Summer travels.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
11-22-2019, 07:28 AM
|
#11
|
Montana Master
Join Date: Oct 2019
Location: Hesston
Posts: 735
M.O.C. #25060
|
Quote:
Originally Posted by mhs4771
...
So I drilled out the rivets between the steps and the mounting hinge and installed pins. Now when we leave our Winter site of 6 months, those steps stay in storage and we use our OEM Fold out Steps during our Summer travels.
|
This is a GREAT idea. Do you have any issues with the joint between the hinge and the steps being loose, since there is slop on the pins?
We actually have a situation where we store our unit that in the winter, we will not be able to fold down the steps. In the summer, I think I can change the angle that it's backed in with, and I could get it in a place that we could put the steps down.
But, if I could make the steps removable, reliably, I could always just back the unit the same way. Then, when we need in, just remove the steps...
|
|
|
11-21-2019, 06:14 PM
|
#12
|
Montana Master
Join Date: Oct 2017
Location: Bee Branch
Posts: 2,620
M.O.C. #20693
|
I was looking really hard at the fold inside steps as they look much sturdier than the OEM fold ups which are springboards. Then we became full time (right next door to DQDick in NM). Now we have a rather large porch (just ask our neighbor) so the fold insides won't work. It's a trade off any way you look at it.
__________________
James & Irene Wilson
Bee Branch, AR.
2017 Ram 1 ton diesel duallyCrew Cab/Long Bed
2018 Montana High Country 381TH Garage Full of Toys
|
|
|
11-21-2019, 06:23 PM
|
#13
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Quote:
Originally Posted by mtlakejim
I was looking really hard at the fold inside steps as they look much sturdier than the OEM fold ups which are springboards. Then we became full time (right next door to DQDick in NM). Now we have a rather large porch (just ask our neighbor) so the fold insides won't work. It's a trade off any way you look at it.
|
I have fold inside steps and a porch
Look at Sunrise RV Products.
https://sunrisedecks.com/
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
11-21-2019, 07:26 PM
|
#14
|
Montana Master
Join Date: Apr 2017
Location: 1000 oaks
Posts: 953
M.O.C. #19630
|
For all of you who are recommending the glow-steps, if the OP has the entry door behind the rear wheel and the 'suicide step" the glow steps will mount and hang down just as low as the original steps and be damaged just like his original steps were and caused the problem.
I wanted the glow steps on mine but they would have been bent and damaged just like the original ones on steep entry and exits. That is why the LCI in the doorway steps were the only way I could go and probably the only option for the OP.
__________________
2011 2955RL Gen-Y Executive Kingpin
2022 GMC 2500HD Duramax/Alison
4X4 Crew Cab/Standard bed.
|
|
|
11-22-2019, 07:48 AM
|
#15
|
Seasoned Camper
Join Date: Apr 2019
Location: Renton
Posts: 69
M.O.C. #23813
|
There is an adapter for the glow steps for the new design 5th wheels that do not have the original steps hanging under the fifth wheel. It replaces the solid steps and folds inside the doorway just as the solid steps do. I saw it at an RV show, but I can't find it on internet this morning. Might be what you are looking for.
|
|
|
11-22-2019, 08:09 AM
|
#16
|
Montana Master
Join Date: Oct 2019
Location: Hesston
Posts: 735
M.O.C. #25060
|
|
|
|
11-22-2019, 05:50 PM
|
#17
|
Montana Master
Join Date: Dec 2009
Location: Sebring
Posts: 3,658
M.O.C. #9969
|
CADman, The holes I drilled are a pretty tight fit on the pins, and since there's two on each side there is very little movement.
And since we don't travel with them, I also drilled on the backside of the inserts for the hand rail, cut two sections of 1" square alum stock to use as spacers and mount my hand rail on the outside.
__________________
Michelle & Ann
2018 Chevy 3500HD High Country DRW 4X4 Crew Cab w/Duramax/Allison, Formally 2010 Montana 2955RL, Now Loaded 2016 SOB, Mor/ryde IS, Disc Brakes & Pin Box, Comfort Ride Hitch, Sailun 17.5 Tires.
|
|
|
11-22-2019, 06:02 PM
|
#18
|
Montana Master
Join Date: Oct 2019
Location: Hesston
Posts: 735
M.O.C. #25060
|
Thanks for the information!
I was looking at the arrangement today. I think that the pins would probably be ok, even if traveling. Like you said, that's across two plates, so there's good support there.
I actually think in the summer I'll be ok. It's the winters that I won't. I was actually able to get I there today, but needed an outside ladder. Wasn't too bad, though....
|
|
|
11-24-2019, 03:12 PM
|
#19
|
Established Member
Join Date: Mar 2009
Location: North Logan
Posts: 12
M.O.C. #9156
|
My wife and I don't like much either folding them up brings dirt, mud, and other things in the trailer. A lot of time we like to just open the door of the trailer and put supplies inside the door to be put away later. We are getting ready to purchase another new Montana and will ask to have them switched out.
|
|
|
11-24-2019, 03:33 PM
|
#20
|
Montana Master
Join Date: Oct 2015
Location: westminster md
Posts: 2,318
M.O.C. #17894
|
I installed the glow steps several years ago. They are great and like said VERY adjustable to almost any terrain.
__________________
2018 Chevy 3500 LTZ Dually Diesel 4x4 CCLB
2011 Montana 3455 SA. 6 point level up. Disc brakes. Curt Q24 Hitch. 5 step glow steps
Progressive EMS. Valterra tank valves. Sailun G637 tires. ARP fridge control. All led lighting. Mor Ryde IS
|
|
|
![Reply](/forums/images/mo/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|