Bdroom Slide on 3800RE

[Golferdave]

Hi Guys:
We have a 2013 3800RE. Great rig! I have a slight problem that I hope MOCers can fix. Sometimes when my bdroom slide is put out the
door to the bdroom will not close. Looks like it is slightly out of
alignment with the door with a larger space between the top of the door and the bottom. The door will not close because the bottom of the door hits the jam. The slide will not go out any more.
HELP.
Thanks.

[Recumbent]

Possibly the cables need adjusting. We had the same problem and Keystone adjusted the cables while under warranty while at the Fall Rally. The door is still not perfectly aligned top to bottom, but now shuts and opens with no interference.

[jcurtis934]

Mine was the same and yes...the slide wasn't even close to being adjusted right from the factory...or CW in Alabama re-adjusted it for some reason. Directions for adjusting it are on the web...but I didn't think the manual was written very clearly. Once you figure out what they are saying, it makes sense. If you find someone that knows what they are doing the adjustments are very fast to make. The slide system is by BAL and is called the AccuSlide. John

[Montana3800RE]

Had same problem with our bedroom door on our 3800 after a Frame Flex repair, adjusted the cables myself and all works great now.. If you study the directions on the ACCUSLIDE web site, on ours there is a sticker above the slide, inside near the motor that shows how to do it...it is really a quite simple procedure