|
06-22-2005, 04:42 AM
|
#1
|
Established Member
Join Date: Jan 2003
Location: W. Columbia
Posts: 17
M.O.C. #98
|
Cleaning Rubber Seam strips
Looking for some information on cleaning the rubber seam strips. Ours have mold on them, want to clean but not sure what is or isnt safe. Appreciate any and all help
|
|
|
06-22-2005, 04:54 AM
|
#2
|
Montana Master
Join Date: Feb 2005
Location: Statham
Posts: 1,410
M.O.C. #3215
|
When we bought our Monty from its previous owners, it came with a good supply of mold on the seams. I tried numerous approaches to it and settled on a kitchen scrubby pad with Soft Scrub, which worked, but it was maddeningly slow. I had about a third of the Monty completed when someone on the forum suggested that Brillo pads might work, so I switched to that, which cut the time more than half, but it still called for a healthy dose of elbow grease!
|
|
|
06-22-2005, 03:02 PM
|
#3
|
Montana Master
Join Date: Nov 2002
Location: Oceanside
Posts: 20,028
M.O.C. #20
|
You mean "Mold-ing" is not supposed to have mold on it? Actually, Lynn & Ruth, this is very common. I've not yet found anything that works really well and then helps keep the mold from returning too quickly. I found black streak removers work but require a lot of scrubbing. But I think I'll try J.D.'s brillo pad approach unless someone posts a better method.
|
|
|
06-23-2005, 02:27 AM
|
#4
|
Montana Master
Join Date: Dec 2002
Location:
Posts: 1,206
M.O.C. #70
|
I finally found a product that I am quite happy with. It's called "Original Krud Cutter". I found it a Lowes. I spay it on the scrubby side of a kitchen sponge and it does a good job. My approach to this is to clean the molding before I plan my big wash day. I might do a section at a few mornings a week or whenever I'm in the mood. This way I have more patience with the task and it does not feel like such a big project.
I find doing all the detail cleaning before a the big wash day is my best approach to making this task easier on my time and patience.
|
|
|
06-23-2005, 05:48 AM
|
#5
|
Montana Master
Join Date: Jun 2003
Location: New Market
Posts: 831
M.O.C. #375
|
Guys try a Clorox bleach pen. The newer ones have two different head, one small and one like a small brush. Put it on, clean, wipe, and rise quickly. It seems to work really well. So far no problems.
|
|
|
06-23-2005, 06:35 AM
|
#6
|
Montana Master
Join Date: Aug 2004
Location: Fallon
Posts: 6,064
M.O.C. #1989
|
Try Mr. Clean's Magic Eraser sponges. I have fallen in love with these.
Happy trails..............
|
|
|
06-24-2005, 04:07 AM
|
#7
|
Montana Master
Join Date: Dec 2002
Location:
Posts: 1,206
M.O.C. #70
|
Parrothead,
Thanks for posting this. I have been looking at those and wondering if they are actually any good. What else do you use them for?
Native Tex,
I tried the bleach pin and it did not work for me. Maybe FL mold is tougher than TX mold.
|
|
|
06-24-2005, 04:44 AM
|
#8
|
Montana Master
Join Date: Jun 2004
Location: Jacksonville
Posts: 897
M.O.C. #1745
|
I keep one of the Magic Eraser sponges at each sink in my home and RV. It really cleans them up nicely. They are great at cleaning up painted walls, especially when the grandchildren do an art project on them. They take the stains out of formica countertops faster than bleach and no smell.
|
|
|
06-24-2005, 08:23 AM
|
#9
|
Montana Master
Join Date: Aug 2004
Location: Fallon
Posts: 6,064
M.O.C. #1989
|
I use them for almost everything. They clean the stove great. Had a nasty stain on the plastic toilet and the sponge took it right off and nothing else had worked. I haven't found anything yet that it hurts. Try it, you'll like it.
Happy trails...............
|
|
|
06-25-2005, 03:55 PM
|
#10
|
Montana Master
Join Date: Feb 2005
Location:
Posts: 1,502
M.O.C. #3142
|
I will have to try one and see how it does..thanks for the tip.
|
|
|
06-25-2005, 04:14 PM
|
#11
|
Montana Master
Join Date: Jan 2003
Location: Ft. Smith
Posts: 981
M.O.C. #116
|
If y'all are talking about the strip in the metal channel around the end caps and down the sides, I used a pressure washer on our old 03 with auto wash soap, took the black right off. No muss, no fuss. In fact, I used the pressure washer to do the entire 5er, just have to be careful around the decals, stay back. We're planning on getting a small. 1300 psi Karcher brand, washer to keep in the front compartment for cleaning on the road. It's not too much larger than a hand vac.
Skip
|
|
|
06-25-2005, 08:05 PM
|
#12
|
Montana Master
Join Date: Nov 2002
Location: Midlothian
Posts: 956
M.O.C. #40
|
I used Acetone to clean the mold on my unit.
Wipe on and wash off.
Just be very careful because it is highly flamable so no smoking.
Just ue a little on a cloth and after you finish use soap and water to wash the area.
You can get Acetone in the paint dept at Lowes or any hardware.
|
|
|
06-25-2005, 09:21 PM
|
#13
|
Montana Fan
Join Date: Oct 2003
Location: Salt springs
Posts: 300
M.O.C. #592
|
Does anyone have any ideas on how to get the brown sap droppings off the rubber roof. I have no black straks or spots but Ido have a good collection of brown sap marks from being parked under some oak trees here in Florida. Thanks
Wa4bmg
|
|
|
06-26-2005, 05:25 AM
|
#14
|
Montana Master
Join Date: Dec 2002
Location:
Posts: 1,206
M.O.C. #70
|
Arg! The dreaded brown spots! I have found nothing that works other than bleach. Because it's a stain and it soaks into the rubber. I have dabbed on little bleach or used a bleach stick on the brown spots that sometimes end up on the rubber molding on the sides, but I have not gone so far as to use bleach on the roof.
I have been thinking of calling a professional RV Washer and asking them if it's possible to remove them and what method do they use. I don't want to or think it's wise to use bleach on the roof.
If you find something to remove them please don't hesitate in sharing your success. I will do the same.
|
|
|
06-27-2005, 04:58 AM
|
#15
|
Established Member
Join Date: Oct 2004
Location: Ocala/Salt Springs Fl
Posts: 13
M.O.C. #2305
|
wa4bmg
Get that 5'er on the road and you won't get them brown spots - helps keep the tires round too.
Sorry John, the mouse made me do it. LOL
|
|
|
06-28-2005, 05:00 PM
|
#16
|
Montana Fan
Join Date: Oct 2003
Location: Salt springs
Posts: 300
M.O.C. #592
|
Quote:
quote:Originally posted by BlackLab
wa4bmg
Get that 5'er on the road and you won't get them brown spots - helps keep the tires round too.
Sorry John, the mouse made me do it. LOL
|
Boy you get all kinds of static from the neighbors. I probably get some kind of spots from the interstate. The way some people drive out there , I think I will take my chances with the oak trees.
See you this weekend.
John,Nancy and Baby
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|