 |
09-25-2014, 09:45 AM
|
#1
|
|
Montana Master
Join Date: Apr 2007
Location: Harford
Posts: 948
M.O.C. #7122
|
Level up Issue
I needed to do a manual level the first night out on the way to Myrtle Beach. In manual mode, the feet, individually as they should, would start down and stop. I would release the button and push again and all I got was clicking. Waited a second and pushed again and all was fine. I thought it was just a fluke so I forgot about it. Once in Myrtle Beach, the AUTO LEVEL worked fine but then the same thing happened on the way home. Could it be the notorious breaker problem showing up in the new system?
__________________
 
|
|
|
|
09-25-2014, 10:07 AM
|
#2
|
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
I had to take our rig into Lippert last week for a slight leak. They replaced the 30 amp breaker with a 80 amp manual reset
|
|
|
|
|
09-25-2014, 04:55 PM
|
#3
|
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
You might just need to reset the computer.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
|
|
09-26-2014, 08:26 AM
|
#4
|
|
Montana Master
Join Date: Jan 2006
Location: South
Posts: 2,499
M.O.C. #5140
|
I see you have a 2005. When did you retrofit? If it was 2010, then you probably have one larger reservoir and your original electric landing gear breaker which may be insufficient for the LevelUp.
|
|
|
|
|
09-26-2014, 08:34 AM
|
#5
|
|
Montana Master
Join Date: Apr 2007
Location: Harford
Posts: 948
M.O.C. #7122
|
I have a 2013. It came equipped with the levelup system factory installed.
__________________
|
|
|
|
|
09-26-2014, 12:19 PM
|
#6
|
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
If you aren't plugged into 120 vac when you are experiencing this, then you could be running into a voltage sag which would mean more current draw on the motor and a chance for the breaker/s causing the issue or maybe that new battery isn't up to snuff. If it still is under warranty, then letting Keystone know of the issue would be wise in case it is the electronics that is the root cause. Good luck with the trouble shooting. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
|
|
09-28-2014, 02:06 AM
|
#7
|
|
Montana Master
Join Date: Jun 2006
Location: Madison
Posts: 1,239
M.O.C. #5906
|
We learned at the National Rally "Tips n Tricks" session that your front to rear readout must be in a positive position before the auto level will work.
|
|
|
|
|
09-29-2014, 05:23 AM
|
#8
|
|
Montana Master
Join Date: Feb 2004
Location: Pahrump
Posts: 2,523
M.O.C. #1081
|
DonandBonnie - What do you mean by Positive Position?
|
|
|
|
|
09-29-2014, 08:35 AM
|
#9
|
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
Positive, high in front. If lower in front than rear, raise front of coach until it is higher
|
|
|
|
|
09-29-2014, 09:12 AM
|
#10
|
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Glad to know that! Have experienced the auto leveler not working, and now understand why.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
|
|
09-29-2014, 12:21 PM
|
#11
|
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
It's not normal, since you usually have the front up in the air to get it off the truck, but certain locations will cause the front to still be low.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
|
|
09-30-2014, 01:31 AM
|
#12
|
|
Montana Master
Join Date: Jun 2006
Location: Madison
Posts: 1,239
M.O.C. #5906
|
Also, your front jacks will extend only 22 inches, the other four 15 inches. Some sites may require additional blocking under the jacks if you don't have enough jack travel to level up.
|
|
|
|
|
10-11-2014, 03:03 PM
|
#13
|
|
Montana Master
Join Date: Sep 2010
Location: North East
Posts: 1,050
M.O.C. #10758
|
So John, did you ever figure out what was wrong????
|
|
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
