|
|
01-27-2014, 03:33 AM
|
#1
|
Montana Fan
Join Date: Sep 2007
Location: Somerset
Posts: 119
M.O.C. #7632
|
Lighting the oven
I asked this question at the Tampa RV show and really didn't get an answer. Why can't someone come up with a way to automatically light the propane oven? The stovetop has an igniter, why not the oven? One sales rep told me that whoever figures that one out will be a millionaire! Come on, you guys! I'll only ask for a small percentage!
|
|
|
01-27-2014, 03:36 AM
|
#2
|
Montana Master
Join Date: Jan 2012
Location: Copperas Cove
Posts: 1,426
M.O.C. #12096
|
http://www.rv.net/FORUM/index.cfm/fu...d/24521274.cfm
I have seen some posts where people have done a mod to put an igniter on their ovens. Here ya go I went searching for the link....has pics too
|
|
|
01-27-2014, 03:53 AM
|
#3
|
Montana Fan
Join Date: Sep 2007
Location: Somerset
Posts: 119
M.O.C. #7632
|
Thank you for the link! I guess I am curious as to why they are not offered, at least as an option. One sales rep said something about traveling with an open flame, electrical codes, passing inspection....
|
|
|
01-27-2014, 04:17 AM
|
#4
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
That has never made sense to me. Traveling with an open flame is when you forget the pilot is on and you travel with gas to the frig. An igniter would keep that from happening.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
01-27-2014, 04:37 AM
|
#5
|
Montana Master
Join Date: Jan 2012
Location: Copperas Cove
Posts: 1,426
M.O.C. #12096
|
Never thought of it but Dick is right, if you have an igniter then you don't have a pilot light. The oven has a pilot light and if you forget to turn it all the way off then it is still lit going down the road.
|
|
|
01-27-2014, 05:34 AM
|
#6
|
Montana Fan
Join Date: Mar 2012
Location: chula vista
Posts: 142
M.O.C. #12317
|
I did this mod to my magic chief oven this was my DW favorite mod and if I ever get In the dog house all have to say how is that oven working it is a very easy mod and it works great has been for about 1 year.
|
|
|
01-27-2014, 05:42 AM
|
#7
|
Montana Fan
Join Date: Aug 2007
Location: Fontana
Posts: 150
M.O.C. #7569
|
Last year at Quartzsite Jackel1959 installed an igniter in our oven. It works great! Several other people have them also and everyone is happy with it. Jack did a great job. I thank him everytime I turn on the oven, no more down on our knees with our bottoms in the air trying to light it. Pat
|
|
|
01-27-2014, 06:12 AM
|
#8
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
We have a oven???????
|
|
|
01-27-2014, 06:13 AM
|
#9
|
Established Member
Join Date: Feb 2013
Location: Grand Rapids
Posts: 27
M.O.C. #13237
|
As long as you light it with the oven door open. Same reason you should not light your grill with the top down. It stops the sightings of UFO's when gas collects and then ignites. This is the reason there is not an igniter in the oven.
|
|
|
01-27-2014, 06:32 AM
|
#10
|
Montana Master
Join Date: Feb 2007
Location: Winfield
Posts: 7,327
M.O.C. #6846
|
I got tired of the bending over to light the thing ordeal also. My solution was to have the oven removed and replaced with a dishwasher that does not need lit! Works for us!
Bingo
__________________
Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.
|
|
|
01-27-2014, 09:16 AM
|
#11
|
Montana Master
Join Date: Mar 2013
Location: Hanover
Posts: 1,472
M.O.C. #13325
|
Although I'd rather do like Bingo did, I'm curious: where did jackel install the button part?
__________________
|
|
|
01-27-2014, 12:24 PM
|
#12
|
Montana Master
Join Date: May 2011
Location: Hixson
Posts: 3,436
M.O.C. #11397
|
I did this mod about 3 weeks ago and it works GREAT! DW very happy.
__________________
2018.5 Montana 3791RD
Full Timers 9/1/2010 through 1/16/2020.
|
|
|
01-27-2014, 12:37 PM
|
#13
|
Montana Master
Join Date: Aug 2008
Location: Rapid City
Posts: 931
M.O.C. #8757
|
Quote:
quote:Originally posted by Ken65
Last year at Quartzsite Jackel1959 installed an igniter in our oven. It works great! Several other people have them also and everyone is happy with it. Jack did a great job. I thank him everytime I turn on the oven, no more down on our knees with our bottoms in the air trying to light it. Pat
|
Jack did ours last year and our neighbors this year!!! So thankful! Of course... In Quartzsite. That is where "work & play" mix!!!
|
|
|
01-27-2014, 02:16 PM
|
#14
|
Site Team
Join Date: Aug 2007
Location: Omaha
Posts: 6,759
M.O.C. #7560
|
KEN65 and Mynabird beat me to it! Jack did the install on Mynabird and HoboBob's oven last year while about six or 7 of us watched. The sparker is installed in the same place as the OEM sparker. The hole must be enlarged and the stove/oven must be pulled out some to be able to run the igniter wire down the back of the unit and in the back of the oven. Since we were not able to attend Q this year I emailed Jack and he was kind enough to give me directions on how to install and sell me the parts needed for the conversion. I think I will be holding off putting it in our present Monte because we are THINKING and I repeat THINKING of purchasing a new unit, so I'll install it in the new unit IF AND WHEN we get the new unit! There is not pilot light involved here since it is a direct ignite of the burner when using the igniter to start the oven!
|
|
|
01-27-2014, 03:05 PM
|
#15
|
Montana Fan
Join Date: Dec 2013
Location: Renton
Posts: 362
M.O.C. #13959
|
Quote:
quote:Originally posted by Rondo
KEN65 and Mynabird beat me to it! Jack did the install on Mynabird and HoboBob's oven last year while about six or 7 of us watched. The sparker is installed in the same place as the OEM sparker. The hole must be enlarged and the stove/oven must be pulled out some to be able to run the igniter wire down the back of the unit and in the back of the oven. Since we were not able to attend Q this year I emailed Jack and he was kind enough to give me directions on how to install and sell me the parts needed for the conversion. I think I will be holding off putting it in our present Monte because we are THINKING and I repeat THINKING of purchasing a new unit, so I'll install it in the new unit IF AND WHEN we get the new unit! There is not pilot light involved here since it is a direct ignite of the burner when using the igniter to start the oven!
|
OK I admit, I'm new, but I think the pilot light's function is two fold. The first is to hold the main gas valve open when the valve is turned to a temperature with the electricity that the thermocouple generates. The second is to act as an ignition source for the main burner in the oven. If you have no pilot light, what holds the gas valve open???
|
|
|
01-27-2014, 03:44 PM
|
#16
|
Montana Fan
Join Date: Mar 2012
Location: chula vista
Posts: 142
M.O.C. #12317
|
i have found that if you have the door open hold the pilot light down for about 10 to 15 seconds then push the light button this will get the thermal coupling hot and the oven will light that if you do the mod all the parts for this can be bought at lowes or home depot i think this took me about 40 mins to do and 40 mins for the DW she want to clean the oven best time to clean it when it is out side are stove gets a work out now and i feel it 20lbs heavier hot cookies and milk go down real good when watching TV
|
|
|
02-02-2014, 05:30 AM
|
#17
|
Seasoned Camper
Join Date: Oct 2010
Location: Simi Valley
Posts: 71
M.O.C. #10801
|
I did this mod.yesterday. very simple and works like a charm.
|
|
|
02-02-2014, 05:53 AM
|
#18
|
Montana Master
Join Date: Dec 2010
Location: Sioux Falls
Posts: 664
M.O.C. #10985
|
Where did you purchase parts? What were they called?. I'd like to do this but want to buy the right stuff.
Quote:
quote:Originally posted by WeBeFulltime
I did this mod about 3 weeks ago and it works GREAT! DW very happy.
|
|
|
|
02-07-2014, 04:55 AM
|
#19
|
Seasoned Camper
Join Date: Oct 2010
Location: Simi Valley
Posts: 71
M.O.C. #10801
|
Parts were bought at Walmart.Igniter works on a single AA Batt.
|
|
|
02-08-2014, 03:38 AM
|
#20
|
Montana Master
Join Date: Jan 2005
Location: North Ridgeville
Posts: 20,229
M.O.C. #2839
|
We would have to unload everything we store in there to light it. Oven you say..I thought it was a heated storage area.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Lighting the oven pilot light
|
GRHooper |
Montana Problems, Problem Solving & Technical Help |
18 |
12-06-2018 05:01 PM |
Lighting oven issues continue
|
jaybird |
Repairs & Service |
5 |
09-16-2015 04:54 AM |
oven lighting
|
ricksay |
General Discussions about our Montanas |
18 |
09-19-2012 03:46 AM |
Lighting the oven
|
trlrboy |
General Discussions about our Montanas |
12 |
11-23-2010 05:07 PM |
Lighting Oven
|
JimF |
Montana Problems, Problem Solving & Technical Help |
10 |
07-18-2009 08:28 AM |
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|