|
Don; I have a Honda EU3000 , which is about like yours, I have aDelta toolbox across the back, My Honda has two handles,one on each side, I snugged the genset up tight drilled 2 holes in the toolbox level with the handles and threaded a coated steel cable around the handles and into the toolbox and secured them inside with cable clamps. this secured the genset,now I made a fabric cover that clamped under the lid of the toolbox, over the top & front of the gen. with two "sides" that slide down inside the handles and have gromets at the corners to secure the sides to the front so nothing flaps.... works great for me and the genset is out of sight !! good luck Dave
|
Linear Mode
