|
07-27-2015, 05:15 AM
|
#1
|
Montana Master
Join Date: Jan 2013
Location: Depends on temps
Posts: 1,648
M.O.C. #13157
|
Question on Dometic 320 Install
Hi All,
Lubing my Thetford is getting old and no longer seems to help the sticking ball thingy.
So, question is: Those that have replaced their Thetford with a Dometic 320 will the water line connect with out any mods? Any other issues with the swap?
Thanks Jim
__________________
2012 Ram Laramie 3500 DRW 4x4 3.73 Tow Max Pkg B&W Companion 60 gal RDS aux fuel tank. 2014 Montana 3150RL, 2 A/C's, Leather, 6 Point Jacks, Splendede WD2100XC, Mor/ryde X-Factor, Duravis 250 tires with TST 507RV monitors. 2 x Honda EU2000's
|
|
|
07-27-2015, 06:10 AM
|
#2
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
I am curious too
|
|
|
07-27-2015, 06:35 AM
|
#3
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
I needed a water flex line and coupler. Do a search on tweety and you will see the kit, but you can get all of it at Home Depot or Lowes. Chances are slim that the floor water line will line up exactly with the toilet itself. Flex line takes care of that.
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
07-27-2015, 07:12 AM
|
#4
|
Montana Fan
Join Date: May 2012
Location: Edmonds, Wa
Posts: 401
M.O.C. #12491
|
I just recently replaced our toilet with a Dometic 320. I cut my waterline at floor level and installed a SharkBite quick connect to the pex waterline with a 1/2 inch male pipe thread in the other end. Then I used a 9" toilet flex with 1/2" female threads on each end. Fit perfect and took me about 20 minutes.
|
|
|
07-27-2015, 07:26 AM
|
#5
|
Montana Master
Join Date: Sep 2013
Location: Pensacola (mail forward service)
Posts: 3,198
M.O.C. #13740
|
Tried without first...it will leak more and more on you. Just go ahead and make or buy what it takes to do it right. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|
|
|
07-27-2015, 09:26 AM
|
#6
|
Montana Fan
Join Date: Apr 2007
Location: Silverdale
Posts: 275
M.O.C. #7117
|
Not trying to dispute what others are saying about needing other connections, but when I did it mine lined up pretty easy. There was enough flex in the PEX tubing that I gently pulled it over and it lined right up with the 320 water connection. Mine is a 2012 model so that might have made a little difference. -Glenn
|
|
|
07-27-2015, 09:58 AM
|
#7
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Different rigs and different factory installs are going to make a difference. Figure you may need the parts (either have them or don't do the project out in the boonies or after the stores are closed) and don't forget, if your toilet has a closet behind it, that many of us also had to raise the closet door a little bit.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
07-28-2015, 06:39 PM
|
#8
|
Montana Fan
Join Date: Mar 2014
Location: New Port Richey
Posts: 438
M.O.C. #14092
|
I used PEX tubing and crimp on clamps when I did mine. I also installed an inline shutoff valve where the tubing come thru the floor so I can shut the water off to the bowl if I need to work on it or a leak.
__________________
2012 Silverado 3500HD|4x4|Crew Cab|long bed|Dually
2012 Montana 3750FL
|
|
|
07-29-2015, 02:48 PM
|
#9
|
Montana Master
Join Date: Dec 2007
Location: Kansas City, Missouri
Posts: 2,707
M.O.C. #7992
|
Like Glen everything reached on mine! Jim
__________________
2006 3000RK
2009 Ram 2500
|
|
|
08-02-2015, 03:16 AM
|
#10
|
Montana Master
Join Date: Aug 2012
Location: Northport
Posts: 624
M.O.C. #12724
|
Looking down on the toilets the dometic connection is a little over 1" further right of the thedford. You might be able to force the pex to connect with no mod. I wanted to put a shut off so I drilled new hole in floor to get it lined up. The cone shaped washer that connects to the toilet is pretty forgiving. It can stand a slight angle and not leak.
I sealed old hole with bondo and decorative flange covered most of hole.
__________________
Paul Northport,AL W4XH
2013 358 RLT Mountaineer
2008 Silverado Duramax
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|