12 volt connectors

[Heli 190]

I would like to tap into the back of my 12 volt panal. Mine is an Iota panal. Has any one done this.If so, what did you use for connectors or terminals.

[H. John Kohl]

You should have spare fuse slots. Get the proper size spade lugs for the back of the panel and put a proper size fuse in no larger than 15 amps in the fuse slot.
Did this answer your question?

[mtheo]

Walt
If you pull your 12 volt panel out, there are spare fuse slots on the back, a standard spade clip should fit, get them at any auto parts house. Be sure to fuse it with the proper size fuse for your application, not sure what the max.amperage is on any of the spare slots.
Good luck