LED Cap Lights and LED Strip

[bullroc3]

I would like to install the LED lights under the awning. I searched them out online and found many. I would like to hear from those of you who purchased on line as to what you purchased and where you purchased. Did what you purchased hold up?

I also have to replace the blue LED cap lights. Do they (inside the cap) have connectors on the ends or are they direct soldered wires?

Thanks

[bigskyjimmy]

Go to the search function and type in" Cap lights" and search under bigskyjimmy posts and I have gave instructions and links to both the eyebrow lights and under awning lights both of the one's I bought on Ebay are still working well and BRIGHT

[bullroc3]

Thanks.

[NCFischers]

I installed LED strip lights that are multi colored on the rig below the awning. we love them.

[waynemoore]

Just an aside to this I have the 12V connectors used for connecting to the porch light wiring. They come in a package of 10 so if anyone needs one please PM me and I would be happy to send you some. No cost just a shame to buy 10 when you only need 1 or 2.

[Ishler]

John
Look for the SMD5050 LEDs(these have RGB in each led for a nice white if you want)with at least IP65 or IP66 waterproofing. Lots to be had on Amazon and EBAY. There are also different remotes, IR and RF, I use the RF so I can turn them off from inside the rig.

[bullroc3]

Wayne - I was thinking about drawing power for the LED strip from the porch light. Do you have a picture of one of these things or a place that I can see one on the 'net.

JM

quote:Originally posted by waynemoore

Just an aside to this I have the 12V connectors used for connecting to the porch light wiring. They come in a package of 10 so if anyone needs one please PM me and I would be happy to send you some. No cost just a shame to buy 10 when you only need 1 or 2.

[rohrmann]

When I installed our LED strip under the awning. I just busted the glass off of the bulb and used butt splices to connect the wires to the filament posts for the LED to the control box, which I was able to fit into the porch light housing. Figured I didn't need the porch light with all the light from the LED's.