Bent spindle on axle

[Dave Anderson]

Just found out I have a bent spidle on my left rear axle. Tried to chedk the serial # and guess what , No serial # !!This is an 'o7 3295 and I thought Lippert ind. did the axles . anyone have this problem, or know what the axles are?

[Ozz]

Bummer!
Give the Montana dealer your model and serial number of the trailer, they can tell which axles are under it. Good luck with the repairs.
If it is an '07, may I suggest having heavier springs installed when they do the work? I put 4,000# on my drivers side and 3500# on the other side.
Ozz

[DQDick]

What Ozz says, and you can also get that info from Keystone Customer service giving them the same info.

[dieselguy]

Besides the adhesive sticker ... the info is usually(not always) stamped on the back side of the axle off center several inches. Unless you really look for it, it's hard to see sometimes. They're probably #6000 axles.

[scductman]

They are 6000# dexter axles I replaced mine the first of this yr. had dexter in ga make a set of heavywall 7000#. my smaller ones lost the camber and eat up the tires.
Bobby