axle allignment
The axles on my 3400 seem to be out of allignment. I know all about the Moride floating suspension and that you need to run it straight ahead to get the slop out before measuring. I've measured it several times at different locations and the left side tires are always 1 1/2 to 1 3/4" closer than the right. I also measured at the axle and the reults are the same. It's at Blue Grass RV in Lexington Ky right now having a front A/C installed and a few minor problems addressed. They jacked it up completely and took all their measurements and said it is dead on. The axles are perfectly even and true. I told them that might be true but maybe when the weight is put back on the axles and the unit is moved something is shifting or loose. He said he would put it down and move it and recheck. I'm still waiting to hear from him. Sounds like Keystone thinks this situation is OK. Anyone have this problem or any ideas about this? Maybe one of the suspension parts is broke or loose and it looks good jacked up but not with weight on it. I don't want to over react but I don't want to be blown off as an idiot either. Thanks for reading what has become a rather lengthy post.
|