|
03-31-2019, 03:56 AM
|
#1
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
3701LK "Pantry" part 1
Well when we bought our LK, DW thought she would be fine without a pantry. 2 days into first trip proved otherwise. Either the cabinets were too high or they were too low and the bend over and reach in was a bit much.
I have never made and installed drawers before. So the project went slow and even though I measured 3 times and cut twice some things had to be done over.
Part 2 will be to add shallow drawers at the other end of the sink.
Part 3 will be to add a big drawer under the sink.
Still need to glue the joints. Here are the before, during and after pix.
In the pic with the rails installed, at the bottom you see 2 loose 1x2s. I used those to measure from the floor to the bottom of the rails. Sort of an install jig.
The top drawer is 16" deep, the bottom is 20". If I had planned this better I could have made them both 20". If DW needs the extra 4 inches I'll make a new drawer. At first I thought the drainline for the sink was going to be an issue. It ends up not being one.
The drawers are 8" and 6 inches high. I made them different sizes so they could be more flexible as to what goes in them. I left space between the drawers again for more flexibility.
Hard part was adapting what was there to attach the rails to. Once that was "engineered" and installed the rails and drawers were easy. (maybe the hard part was the close quarters)
I included a pic of the waste can drawer removed. It shows the size of the hole in the floor for the fresh water tank vent. Folks who are concerned with insulating things may want to add insulation here.
It also shows some of the bracing I used for the rails.
If anyone has questions fire away.
Jeff
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
03-31-2019, 04:04 AM
|
#2
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Oh and as any good project goes I had to get a router and table to "notch" the bottom of the sides to install the bottom.
I mean the purpose if these projects is to acquire a new tool, right?
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
03-31-2019, 07:16 AM
|
#3
|
Montana Fan
Join Date: Jun 2014
Location: Kamiah
Posts: 334
M.O.C. #14438
|
Looking good.
__________________
Ron&Sue
2017 Montana 3720RL Legacy
14' Ram 3500 DRW
|
|
|
03-31-2019, 09:13 AM
|
#4
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Very nicely done project!
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
03-31-2019, 01:24 PM
|
#5
|
Montana Master
Join Date: Jan 2018
Location: Thornville
Posts: 546
M.O.C. #21110
|
I`m hiding this thread from the DW...
__________________
Darwin & Carla
2018.5 3701LK Montana
2022 3500HD Denali Duramax SRW
|
|
|
03-31-2019, 01:33 PM
|
#6
|
Montana Master
Join Date: Oct 2017
Location: Bee Branch
Posts: 2,620
M.O.C. #20693
|
Good job. And shhhhh about the new tool thing LOL......
__________________
James & Irene Wilson
Bee Branch, AR.
2017 Ram 1 ton diesel duallyCrew Cab/Long Bed
2018 Montana High Country 381TH Garage Full of Toys
|
|
|
03-31-2019, 04:38 PM
|
#7
|
Established Member
Join Date: Mar 2019
Location: Bryson CIty
Posts: 13
M.O.C. #23613
|
Quote:
Originally Posted by jeffba
Oh and as any good project goes I had to get a router and table to "notch" the bottom of the sides to install the bottom.
I mean the purpose if these projects is to acquire a new tool, right?
|
The 'new tool' is the reason my DH doesn't mind doing any new projects. Looks good. We just looked at the LK model yesterday and noticed the missing pantry. Great way to solve the issue for your DW. I will be keeping note of this post just in case we have to do the same thing.
|
|
|
03-31-2019, 06:08 PM
|
#8
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Wife is very happy with it.
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
07-07-2019, 04:18 AM
|
#9
|
Montana Master
Join Date: Oct 2017
Location: Bastrop
Posts: 2,892
M.O.C. #20753
|
Pantry Part 2
Okay no more having to get on the floor to get pots and pans
__________________
Mocha, one-eyed toothless, hurricane survivor, Pirate dog
2019 20th Anniversary Edition 3701LK
B&W 20K for Ford OEM Puck
2018 Ford F-350 Lariat CCLB PSD DRW KJ5CQH
|
|
|
07-07-2019, 04:35 AM
|
#10
|
Montana Master
Join Date: Aug 2015
Location: Mena
Posts: 504
M.O.C. #17723
|
__________________
Ron & Rhonda
2021 3230CK Montana Legacy w/ Super SolarFlex
(old rig) 2015 Montana 3611RL 8K I.S., Disk Brakes, Sailun Tires
2015 F350 XLT Crew Dually 20K B&W Companion
|
|
|
07-07-2019, 07:37 AM
|
#11
|
Montana Fan
Join Date: Feb 2018
Location: Arlington
Posts: 136
M.O.C. #21176
|
Great job looks like it will a lot more user friendly.
__________________
2011 Volvo 780 485 HP/1750 TQ 13 Speed 32000 lb ET air ride hitch
2016 Montana 3820FK Legacy package
|
|
|
07-07-2019, 08:49 AM
|
#12
|
Montana Master
Join Date: Jan 2017
Location: Overland Park
Posts: 991
M.O.C. #19388
|
Awesome job! Looks great.
__________________
Marilyn and Richard, Dusty and Gabby
Overland Park, KS. Most Timer
2017 Montana Legacy 3810MS
2020 GMC 3500 Crew Cab Dually
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|