Quote:
Originally Posted by TheKothes
Installed the PVC and cleaned out the sawdust. Tied up the wires as well. It is noticeably louder which tells me there is more air flow. We will find out on the next venture.
|
Did you cut the flanges off the registers that is sticking up in the duct? Mine were almost touching the top of the duct work?
I also added 3 more registers which will quieten down the rumbling you hear which is from pressure build up!
Also be sure to seal up the joints in the upper portion of foam shroud, if you didn't, turn on unit and go up there, you will be amazed of the cold air escaping!