|
01-29-2016, 04:49 AM
|
#1
|
Established Member
Join Date: Aug 2015
Location: Canal Fulton
Posts: 16
M.O.C. #17708
|
furnace filter?
Just wondering if and where there is a filter for the furnace on our 2015 Montana 3582RL. Does anyone have some advise on this? I see slots in the step risers, but wanted to check before I start tearing things apart looking. Thanks in advance for any advise.
Dennis B.
|
|
|
01-29-2016, 05:11 AM
|
#2
|
Montana Master
Join Date: Mar 2015
Location: West Richland
Posts: 1,253
M.O.C. #17164
|
I have never seen or heard of any of my RV's having one. Some of the old AC's had a foam filter. On my last camper I had to replace the circuit board and never saw any type of filter. The heat exchanger is quite different than that of what is in my stick frame home. Maybe somebody else will have better info than me.
Tom Marty
__________________
|
|
|
01-29-2016, 06:18 AM
|
#3
|
Montana Master
Join Date: Feb 2005
Location: Haysville
Posts: 4,261
M.O.C. #3085
|
No filter as it comes from the factory. Some have removed the grills under your steps to the bedroom and installed make shift filters. That is pretty useless on my 3150RL as the grill under the fridge also is a possible return air source for the furnace.
|
|
|
01-29-2016, 06:28 AM
|
#4
|
Montana Master
Join Date: Apr 2013
Location: Arroyo City
Posts: 3,110
M.O.C. #13395
|
At a rally I attended a seminar presented by Suburban and they recommended no filters because it would restrict air flow. They said the furnace was designed to be filter free
|
|
|
01-29-2016, 06:29 AM
|
#5
|
Established Member
Join Date: Aug 2015
Location: Canal Fulton
Posts: 16
M.O.C. #17708
|
Thanks guys, just thinking to much, and didn't want to not be checking something I should
Dennis B.
|
|
|
01-29-2016, 10:15 AM
|
#6
|
Site Team
Join Date: Jun 2011
Location: Wilsey
Posts: 18,799
M.O.C. #11455
|
Check with Ozz. He's an HVAC guy and installed them on his rig and I think can direct you to pictures.
__________________
Dick, Joyce, Diego, Picatso and Gustav
2017 3720 RL, and 2013 HC 343RL
Pullrite Hitch, IS, Disk Brakes, 3rd AC, Winegard Traveler, Bathroom door mod, Dometic 320, couch for desk swap, replaced chairs, sun screens, added awnings, etc.
|
|
|
01-29-2016, 11:40 AM
|
#7
|
Montana Master
Join Date: Jul 2010
Location: Lake Havasu City AZ.
Posts: 1,811
M.O.C. #10552
|
I have the same rig. I installed filters behind the intakes under the steps. I also insulated the wall between the basement and the area under the bedroom. The furnace has plenty of makeup air as the area it is in is quite large and open.
__________________
Wayne and Ann Moore
2015 Ford F-350 King Ranch
Firestone air bags, bed saver.
Add 40 GAL tank in bed.
|
|
|
01-29-2016, 12:08 PM
|
#8
|
Montana Master
Join Date: Feb 2012
Location: Lake Gaston
Posts: 8,773
M.O.C. #12156
|
Never had a filter system on any of our rigs
__________________
Mike and Lorraine
2002 3655 FL, 2005 3650RK
2010 3665RE, 2015 3910FB
F350 crew cab dually 6.7
|
|
|
01-30-2016, 11:32 AM
|
#9
|
Montana Master
Join Date: Apr 2009
Location: Murrieta
Posts: 5,816
M.O.C. #9257
|
I have read that for summer, some have blocked the steps to prevent losing cold air, but if you run the furnace, this should not be blocked. These holes are a major source of recycling air to heat in the rig.
We don't block the vents in any case so it's not something else I need to worry about. While I am not aware of a filter for the furnace, I use standalone electric heaters that need minimal cleaning when we want to keep propane usage low. Also, our living room ceiling A/C does have a filter that I clean out regularly during summer usage.
|
|
|
01-31-2016, 02:39 AM
|
#10
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
A filter is safe to use, there is no problem with installing one, I have had one I my unit since '07
The crud floating in the air either gets caught in the filter, or on your heat exchanger in the furnace, I prefer to have clean air in my living space and keep the furnace clean. When the heat exchanger gets hot, the animal hair, lint, and dust gets burned onto the metal.
I cut down a pleated filter and installed it behind the wood grate
|
|
|
01-31-2016, 05:18 AM
|
#11
|
Montana Master
Join Date: Feb 2004
Location: Brandon
Posts: 3,944
M.O.C. #1034
|
Ozz gives good advice for on this matter for sure.
__________________
Darwin & Maureen DeBackere
Minnedosa, Manitoba, Canada
2011/3500/Silverado/4x4/DRW/Duramax
2017/3721RL/Legacy Pkg./Pressure-Pro
|
|
|
01-31-2016, 06:43 AM
|
#12
|
Montana Master
Join Date: Jul 2006
Location: K.C.
Posts: 11,731
M.O.C. #5980
|
Well,
I tried subscribing to this thread; got 43 notifications
For one response
Guess I can't use the subscribe feature, this happened the last time I tried it.
Guess the forum doesn't like me... Or, likes me ALOT lol
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|