Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Use Dexter on AL-KO

awaywego · 05-12-2005, 02:58 AM

Azstar,
I thought about putting the zerks on the other side but I didn't want to crawl under to lub each time. Instructions say lub every 3000 miles and I would be under every few weeks on a trip.
I used a C clamp to press the bushings and bolts into place instead of hamering them in.
I greased the bronz bushing and put a big headed bolt in the end then used the C clamp to press it in.
As for the rear kitchen the 3280 has a side kitchen but I think the weight of the slide and all the items in the slide added to the fast deterioration.
All the plastic bushings were worn out on all the wheels and some wear on all the shackles but the right rear was the worse.

05-12-2005, 02:58 AM	#27
awaywego Montana Master Join Date: Nov 2002 Location: Midlothian Posts: 956 M.O.C. #40	Azstar, I thought about putting the zerks on the other side but I didn't want to crawl under to lub each time. Instructions say lub every 3000 miles and I would be under every few weeks on a trip. I used a C clamp to press the bushings and bolts into place instead of hamering them in. I greased the bronz bushing and put a big headed bolt in the end then used the C clamp to press it in. As for the rear kitchen the 3280 has a side kitchen but I think the weight of the slide and all the items in the slide added to the fast deterioration. All the plastic bushings were worn out on all the wheels and some wear on all the shackles but the right rear was the worse.