Quote:
Originally Posted by mlh
The cables should have some slack in them when they aren’t the cables pulling the slide. If the slide isn’t extending straight it probably means the cables aren’t adjusted properly. Go to the manufacture’s web site. It should tell how to adjust the cables and how much slack should be in the cables. When the cables are too tight it puts too much strain on the wall and the pulleys.
Lynwood
|
Lynwood - you gotta go back and read it again
. It's going out perfectly straight. The slide is adjusted to the NORCO/BAL website/manual and has the proper amount of tightness in the cables with no slack now. It's that the slide is tilted in the 5ers side wall by about .25". i.e. not level with the bottom frame as it should be to prevent diagonal corners from rubbing.