|
Solved the problem. After using a hose and running in various places on the RV to try to reproduce the leak, I found that the water that runs off the roof of the slide, runs down the side of the slide where the screws are holding the molding in place. After removing one of the screws I found there was no sealant used on the screws. (the screws holding the top molding in place all had sealant) Figure that one out. I removed each and every screw on all my slides and injected caulk and replaced the screw and sealed the heads. No more leaks.... Thank you all for directing me in the correct directions.
|