|
OK, we are on track to get to leave Dallas on 1/19 putting us into Q on 1/21 or 1/22 depending on weather and driver fatigue.
The problem with our 'floating' front end on the 3400RL was that the three bonded aluminum rails holding the fiberglass to the frame separated. This allowed the walls in the front end to slide up and down causing the wall in closet to buckle. They inserted wood into the aluminum tubes and put screws through the rails and wood into the frame. The whole repair procedure was provided by Keystone in a 15 page document.
We are now waiting on the parts needed in the refrigerator recall. Hopefully, that won't hold us up. Also, our Syvania microwave has developed a short since our last trip, so that has to be replaced as well.
Jerry
|