|
We did a mod on ours that works well. Take the doors down. At the top where the metal slots are, at the narrow end of the slot , drill a small starter hole in the wood. Install a 1 in wood screw in the hole, allowing 1/8 in of the screw to remain exposed. Do this at all locations. As you rehang doors, use nylon zip ties to bind the roller post to the screw to prevent loosening. Make sure the Teflon keepers at the bottom are snapped firmly into tracks, this is a little difficult, but you should hear a loud snap when it goes into the rail. Then, put a cup hook inside the closet beyond the doors farther reach. Now put a cup hook on the outside of the closet in an inconspicuous place. Before travel, use a bungee from hook to hook to hold doors open and still. Has worked really well for us.
|