|
A vacuum formed tank is a two piece tank. The top is flat and glued/welded to the bottom vacuum formed bottom. Keystone is not mounting these according to the instructions, and the "engineer" I spoke with at Ameri Kart. The instructions you are seeing online speak to several ways to mount the tanks. The chassis mounting method is not being used. Keystone is hanging the vacuum molded tanks on rails with no straps.
The rotational formed tanks are designed to be hung on rails as the tanks have a flange an inch or two wide which is suitable, not needing straps or other support from below. (Although extra support is good)
It is odd that their instructions say: To test tank,fill with plain water and check visually. Do not use liquid soap or DETERGENT SOLUTION as the solution will cause stress cracking in the plastic.
__________________
2016 3160, Legacy, Sailuns, Splendide 2100 xc vented, 1 1/2" axle lift blocks, disk brakes. 2014 Ram 3500 SRW SWB 4X4 6.7 Aisin Mega Cab, EBC slotted disks and brakes, Titan fuel tank.
|