|
Dean, if you unscrew the screws that hold the gas pipe hangers and make a slice from the laundry drain pipe to the edge of the belly pan material you should be able to get the panel out. The same goes for the next panel forward that the black/gray water dump pipe comes through, just make a cut from the pip hole to the nearest edge of the belly panel. I used a utility knife with a new blade and it took my about 7 or 8 passes to cut through, but then the panel came right off. When the dealer put everything back together they used a black tape like Eternobond that is very strong and permanent... Dave and Betsy
|