|
I just finished securing my fresh water holding tank. Found the frame the tank sat in was good and secure for front to back movement. But side to side only had 1 L shape tab - thus it moved from side to side considerably. I shimmed it with 1 3/4 board on one side and a 2 1/4 piece of wood on the other side which I screwed to the frame and against the L bracket.
Now why the belly is down I am staring to better insulate it. I placed pipe insulation for about 12 feet going forward on both the city and holding tank water lines. ( I'll add more as I take other parts of the belly down). And I'm off to HD to get 3 1/2 R13 insulation and lay in the underbelly as far forward as I can get it push in and up under the back cap. I'll continue to add insulation under the belly as I take other parts off.
|