Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

BillnJudy · 06-24-2019, 08:12 AM

The hole in the bolt should be at the 3 or 9 o'clock position. Before inserting the bolt use a marker and make a mark on the head of the bolt so when you tighten the nut you will be able to see if the hole is still in the correct alignment.

06-24-2019, 08:12 AM	#4
BillnJudy New Member Join Date: Dec 2017 Location: Canby Posts: 9 M.O.C. #20978	The hole in the bolt should be at the 3 or 9 o'clock position. Before inserting the bolt use a marker and make a mark on the head of the bolt so when you tighten the nut you will be able to see if the hole is still in the correct alignment.