the wheel need to be turned when greasing the bearings. so you want to jack up one tire at a time and spin the tire to alow the bearings to except the grease.
jim
Quote:
quote:Originally posted by Dave e Victoria
We have the axle hubs that are lubbed with a grease gun. The manual says to pump in grease until it starts to exit through the return ports around the grease fitting. On the first three, it took about 15 to 20 pumps on the grease gun before grease appeared coming out. However the last one (forward-right side) only required about 3 pumps. I made sure the grease gun nozzle was connected properly.
Here's the question. Is this normal? If so, why?
|