View Single Post
Old 08-23-2016, 05:43 PM   #49
kozzy
Montana Fan
 
Join Date: Dec 2015
Location: Nokomis
Posts: 464
M.O.C. #18144
I like it. I made some head way with my AC this last few days as well. Installed some bat insulation behind both thermostats, because the holes were huge. I could feel a little draft before I started so I think that is a plus. Used an IR thermometer and check my air in vs air out, was a good 20+ degree difference, almost 30, so its cooling. Next, I removed the duct covers, all looked well, and I didn't have hardly anything extending into the duct, but I did cut some louvers out of the caps, every other one, on 3 of the caps. WOW what a floe difference, and the unit cools down much much faster. Ill leave it at that for now and see how it goes. Oh, also had a rattle when I turned on the front AC, fount a set screw on one of the fans was not holding it secure on the shafte, a quick adjustment and tighten with a HEX wrench, and all is well on that. lets see how it goes on my trip this week.
__________________
Ed
2016 Montana 3950 BR
2004 Montana 3650 RK
2019 Ram 3500 SRW Laramie CTD 6.7
kozzy is offline   Reply With Quote