Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

Phil P · 10-19-2018, 04:22 AM

Hi

We had a similar problem and it turned out to be the brake application arm that the magnet is attached to had rusted in the hinge point not allowing the brake to release completely.

This requires removing the hub to check on that. I removed all hubs and replace the brake shoes and lubricated all the hinge pints for this arm. They all needed lubrication. I use the silver high temp Anti-Seize Compound & Lubricant 8 oz Permatex sold by NAPA for lubricant.

That has been many years ago now.

Phil P

10-19-2018, 04:22 AM	#17
Phil P Montana Master Join Date: Mar 2011 Location: Okeechobee Posts: 2,150 M.O.C. #11206	Hi We had a similar problem and it turned out to be the brake application arm that the magnet is attached to had rusted in the hinge point not allowing the brake to release completely. This requires removing the hub to check on that. I removed all hubs and replace the brake shoes and lubricated all the hinge pints for this arm. They all needed lubrication. I use the silver high temp Anti-Seize Compound & Lubricant 8 oz Permatex sold by NAPA for lubricant. That has been many years ago now. Phil P __________________ 2009 Montana 3665RE 2009 Duramax 3500 DRW quad cab personal web page https://www.sallyscoffees.com If you get a page not available then remove the "s" after HTTP