Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Middle of trip brakes not working correctly

Scootsk · 09-15-2023, 05:33 PM

Today I had the opportunity to look underneath and found this. The curb side rear brake wires seem to be cut or were never attached. I did confirm that I have no brakes on the rear axle. Fronts seem to be working fine but are just not enough. Question is, how would these be attached? Do I need to worry about polarity? It seems to be the main feed as there are two wires attached (black side) with one set going through the axle tube to the street side rear brake and the other into the curb side brake drum. Can I just hook the white wires to the joined blacks?

09-15-2023, 05:33 PM	#6
Scootsk Montana Fan Join Date: Apr 2019 Location: Long Isalnd Posts: 137 M.O.C. #23929	Today I had the opportunity to look underneath and found this. The curb side rear brake wires seem to be cut or were never attached. I did confirm that I have no brakes on the rear axle. Fronts seem to be working fine but are just not enough. Question is, how would these be attached? Do I need to worry about polarity? It seems to be the main feed as there are two wires attached (black side) with one set going through the axle tube to the street side rear brake and the other into the curb side brake drum. Can I just hook the white wires to the joined blacks? Attached Thumbnails __________________ Don and Kathleen 2019 Montana 3791RD 20th anniversary. 2014 Ram 3500 Dually CC, CTD, Aisin “Kasper”