View Single Post
Old 11-07-2018, 11:03 AM   #6
Established Member
Join Date: Jun 2017
Posts: 15
M.O.C. #20051
I removed the screws from the igniter plate and used the furnace fan to blow the excess water out of the fire box. after it drained I used the wife's air drier and blew back through the furnace exhaust for about an hour, to dry everything. I then screwed the igniter plate back on and started trying the furnace. It worked ok. The water got in there because my trailer was tilted a little to the right, combined with high winds and heavy rain, this was the perfect condition for what had happened. Cheers Glenn I also put a bead of silicone around the outside plastic cover.
GLENNCALVIN is offline   Reply With Quote