Quote:
Originally Posted by rohrmann
It's just easier to make a hole exactly where it will work best for you and you can get one of these Winegard cable entry plates that are used to bring antenna cables from a dish to inside the rig. You use the self leveling Dicor under and around the plate and screws and you will not have to worry about a leak. We had our Trav'ler dish installed over 6 years ago and a three cable entry plate was used and have never had a leak.
https://www.amazon.com/Winegard-CE10...le+entry+plate |
Thanks, Rohrmann - I think for now I’ve decided to just run the wire in through the window if/when the booster is needed. But knowing me I’ll get tired if that and end up drilling the proper hole as you’ve suggested. I’ll keep your note and link in Evernote for that time. Thanks!